EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Merrillville
> Self Propelled
> Air Brakes
> Under 150 PSI
> Magnesium metal stick rod bar 1LB mag mg firestarter
Magnesium metal stick rod bar 1LB mag mg firestarter
Magnesium Billet Stick Rod Bar 1LB Mag Mg FireStarter
12 X 1 99.8 Pure Magnesium Bar Stock Ingot Stick Fire Starter
99.8% Pure Magnesium Round Stick Rod
Density 0.0628 pounds per cubic inch
Magnesium is the third most commonly used structural metal, following steel and aluminium.
Standard Specification for Unalloyed Magnesium Ingot and Stick : Magnesium 99.8%min; Iron(Fe) 0.05%max; Silicon(Si) 0.03%max; Nickel(Ni) 0.002%max; Copper(Cu) 0.02%max; Aluminium(Al) 0.006%max; Chlorine(Cl) 0.005%max; Manganese(Mn) 0.06%max; Impurity: 0.20%max
33% Lighter, Superior Machining, Large thin-walled near net shape casting, Similar or greater mechanical properties and Greater general corrosion resistance
75% Lighter, Significantly lower tooling costs, High heat conductivity, Complicated thin-walled near net shape casting and Superior dimensional stability/repeatability
Stronger, Superior stiffness, Greater energy absorbing capabilities, Higher temperature applications and Large thin-walled near net shape casting
All that you need to use as a FIRE starter is to Use a sharp knife (not included) to scrape a pile (about the size of a quarter) of magnesium scrapings under a little dry combustable material and with a few scrapes of a flint , you will have a tiny 5400-degree fire that will ignite your combustable material even in damp or wet conditions.
