EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Merrillville
> Self Propelled
> Air Brakes
> Under 150 PSI
> Gluco pneumatic 32T plastic rubber compression molding
Gluco pneumatic 32T plastic rubber compression molding
Our Asset #:MS239, MS240, MS251 - 000 Qty available:3
Gluco Pneumatic 32T PLASTIC RUBBER COMPRESSION MOLDING
Est. Rigging fees $35 per 1,000 lbs: $70.00 Est. Packaging: $ 35.00
Condition: UNKNOWN looks good but can't test Guaranty: See our 7 day DOA Guaranty!
Full Description or BackgroundHIGH SPEED Bar spacing 14.5" x 5.5"
They need a little cleaning up but these units are a great value.
We had about 20 of these compression units in different sizes and everyone has been happy Tag Photos or information
Model: 34SAD4410011D Serial #: 25720-BDX Year: NA
HP/Amp/KW/KVA:30 Voltage: 240 Phase: 220 single Other Info:
Please click on the JPGs below for more photos
MS239.6.JPGMS239.7.JPGMS239.8.JPGMS240.2.JPGMS240.4.JPGMS240.5.JPGMS240.6.JPGMS240.7.JPG
CLEAR Vertical Bar spacing 14.5" x 5.5"
Double toggle action is ideal for compression molding with these fast presses. The functions of material metering, cavity loading and molded part ejection are mechanically interlocked and motivated by the moving press platen. Ejection occurs near the top of the stroke as parts produced are positively stripped off the upper old half and blown out by a cam actuated air blast while at the same time molding power is loaded into the cavities.
The simultaneous feed/eject action of these presses, which never really stops excepts for material curing, yields fastest molding cycles possible.
* Exclusive jam proof feed/eject mechanism
* Instant material feed ON/OFF knob
* Infinite shot size adjustment for each mold cavity
* Cam actuated air sweep to clean mold after each cycle
* Manual override buttons for set up and trouble shooting
* Plug in timers and limit switches
* Degassing arrangement with tow extra timers
* Bottom lift cylinder and rods with stops
* Top eject with adjustable stroke and return springs
* Hardened steel toggle bearings and ram guides
* Hard chrome plated posts
* Thermostat temperature controls
* Air filter, regulator, lubricator units
* Exhaust silencing flow controls
* Speed and pressure controls for transfer ram
Semi Automatic Models equipped with:
* Dual push buttons for press closure
* Push button actuated bottom eject
* Spring loaded top hold down system to keep parts in bottom mold when press opens
* Hydraulic instead of air power
* Large malfunction indicator lamp
* Pulsating eject strokes, variable
* Fused safety shut off switch
* Twist lock heater outlets
* Heated platens on spacers, insulated, incl. heaters
* Turnkey systems with tested molds
* Combined models capable of compression and transfer molding
* Timer to soak material prior to transfer action
* Foot switch for bottom eject actuation
* Transfer pot and plunger - made to close tolerances for interchangeability - in hardened tool steel. Plunger hard chrome plated for ready cull release. Pot installed in bottom heater
Length: 30 Width: 36 Height: 85
a. Est. Wt. each: 1,300LBS b. Est. pkging wt: 95 c. Est. total wt: 1395
