EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Merrillville
> Heavy Machinery
> Parts
> Huge swedish thermoelectric peltier w/ heatsink & fan
Huge swedish thermoelectric peltier w/ heatsink & fan
Giant ThermoElectric Peltier unit with Heatsink & Fan!
These units each have TWO Supercool Peltiers
This is a Supercool (Sweden) brand Peltier unit, it was removed from industrial equipment. This is not a junky chinese CPU Cooler, this was installed in an expensive machine. We powered it up and it got hot on the silver surface which measures 4 3/4" x 2 1/8" (55x120mm) and it is 1/2" thick. The cooling element is surrounded by 1/2" thick foam for insulation. The whole thing is mounted in a heat sink that measures 8 1/4" x 4 11/16 and it has a 3 5/8" fan on the side.
It appears this unit is set up to provide heat on it's surface and cool air through the fan. I took this unit apart and found TWO supercool brand peltier units inside, sandwiched between the metal plate and the heatsink. I flipped them over so the hot/cold sides were then reversed. I attached the wires to a battery and after a while this is what I had:
ICE. Lots of ice. Now, these are not set up this way but it was childs play to flip the peltiers over. I have had numerous emails from people saying it is only necessary to reverse the wires, but it was easier to unscrew three screws and flip them over than to unsolder the wires from the power board which DOES have polarity sensitive components on it. We tried reversing the wires and we got flames from the capacitor on that board.
The temperature indicated on our test unit. Ambient temp is 72.4 F. This is two units, one that I reversed and one that is as you will get it, to produce heat on the surface and cool air from the fan.
Now, your attention please: We have lots of these, you are going to get a unit that is as removed from the expensive industrial equipment these were in, not the one in the picture. These are all the same, but you are getting a completely unmodified and untampered/untested unit. We junked out the machines and these were a little too slick to junk. So here they are!
We are not warranting these, we have not tested them. But understand we have sold hundreds of these with no complaints from anyone, except for one guy who hooked up the power backwards and blew out his power control board with a loud snap and fire, which we tried too with the same result! So don't do that and you will not have any trouble.
This is operating on 12VDC 6A. P/N is DA-051-12-00-00-SN. According to the manufacturer that means Direct Air, 51 Watts Cooling, 12 VDC 6A.
Click on the graph below to see the manufacturers engineering manual. The drawings and documentation I have is HERE.
Ex =Example: At ambient 32 C and cooled space temperature 2 C (delta T = 30 C) the DA-075-24-02 (curve C) cools by 32% of its maximum effect, which gives Pc = 71 x 0.32 = 22.7 ( 10%)
* Google is your friend. For more information about our items that's what we use, you should try that before asking us questions. Google almost always knows more than we do. You are expected to do your own research.
* We nearly always use actual pictures of our items. If we have more of something and are using a generic picture that will be stated in the picture caption.
* Our items are not new unless they are stated as NEW in the description.
* If you don't see a part, accessory, key, manual, cable, wire, cover, software disk, license or other item in the picture then that is not included. What you see is what you will get. Please do not expect any items to be included that are not shown in the picture.
* Description and feature statements are often found on the internet and are often labeled as such "Information found on the Internet", and they might be incorrect like lots of internet information. You are always expected to do your own research.
* In almost all cases all we did was plug it in and see if it looks like it powers up. Some items would require an entire engineering test lab or other equipment to test thoroughly.
* We are not the personal, previous user of any of this stuff. We almost never know how old it is, or even whether it works perfectly.
* On more valuable items we try to test more thoroughly when possible, but sometimes we can't test completely due to the complex technical nature of the item.
Email Confirmations & Communications
1. One after you place your order.
* We are remarketers of surplus equipment, we cannot provide technical support on this sale.
* Stated amount is for delivery in the continental USA only. Other locations will be more. Alaska, Hawaii, Puerto Rico, Guam are not part of the continental USA.
* Please be sure to include your phone number with your international order, a phone number is required by the carrier for international.
* We respond to all our emails, if you don't get a response within 24 hours Monday through Friday resend it.
* Unfortunately, 4 stars is considered a bad rating for sellers. If we have not given you reason enough for 5-star grades on each DSR then please let us know how we can earn your 5-star rating before submitting your scores!
* If you have questions about an item we prefer you email your request rather than phone. We respond to all our emails, if you don't get a response within 24 hours resend it. We usually respond within a few hours to inquiries.
* We are Recomp Group Inc. 1704 S. Santa Fe Street, Santa Ana, CA 92705. You would be surprised how many times we are asked for this information.
* Business Hours: 9:30-4:30 Monday-Thursday, 9:30-3:30 Friday, CLOSED WEEKENDS
All Specs may have been obtained via the internet. Any testing performed by us is basic and noted in the description. We have no technical knowledge or expertise regarding this type of equipment. All items described as used, out of the box, or New out of the box may have some minor scratching and scuffing unless otherwise stated.
