EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Merrillville
> Heavy Machinery
> Parts
> Goot desoldering wick remover 2.5MM x 1.5M tools
Goot desoldering wick remover 2.5MM x 1.5M tools
Goot Desoldering Wick Remover 2.5mm x 1.5M TOOLS
1.PLACE THE DESOLDERING WICKING OVER THE SOLDER TO BE RECOMED, THEN PUSH THE HEATED SOLDERING IRON TI ONTO THE DESOLDERING WICK,THE SOLDER WILL BE ABSORBED.
2.REMOVE THE DESOLDERING WICK AFTER THE SOLDER HAS BEEN ABSORDED
3.CUT OFF THE USED SECTION OF THE WICK USING NIP-PERS.
4.REPEAT STEPS 1,2AND 3 IF THE SOLDER IS NOT RE-MOVED COMPLETELY.ABSORBABILITY MAY DIFFER DEPENDING ON THE TYPE OF SOLDER.Sn63% and 60% (tin content ) have good absordability.
