EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Merrillville
> Heavy Machinery
> Electrical
> High Frequency Converters
> Under 1 MhZ
> Hanna 800 ppm tds calibration solution - 3-pack
Hanna 800 ppm tds calibration solution - 3-pack
Genuine Hanna Instruments 800 PPM TDS Calibration Solution for use with the Hanna TDS1 Meter.
Each packet contains 20 ml of pre-mixed, ready to use calibration solution. Simply tear or cut off the top of the packet and insert your TDS meter. Insert your calibration screwdriver into the small hole on the side of your meter. Some meters will have the calibration screw inside under the black battery compartment. Turn the screw until the meter reads 800 and you're done. When you're finished calibrating, you can fold over the top of the foil packet or pour it into a clean baby food jar or other small jar until you need it again.
This is genuine Hanna Instruments calibration solution - the ONLY solution you should ever use to calibrate your Hanna meters.
Your TDS1 meter has automatic temperature compensation so you do not need to follow the temperature compensation chart on the front of the package. No matter what the temperature is, you should always calibrate your meter to 800.
Photo for illustrative purposes only
