EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Merrillville
> Heavy Machinery
> Electrical
> AC Single Phase
> Simulate floppy to usb converter for embroidery machine
Simulate floppy to usb converter for embroidery machine
Convert your floppy driver to usb.
for embroidery machine, flat knitting machine and label weaving machine
Capacity of floppy disk used on machine
Flat knitting machine: STEIGER
Label weaving machine: STAUBLI-JC4
TAJIMA: TEHX TMEX TMKD TMLH TMCE etc
SHIMA SEIKI SES with floppy driver model: NEC/TEAC
SHIMA SEIKI SES with floppy driver model: YD702D-6537/6037/6639
SHIMA SEIKI SES with floppy driver model: YD-702D-6238
Size and Connection: same as floppy driver
1.Floppy to usb conversion through 34pin or 26pin floppy disk driver interface,easy to install,no need to modify system settings.
2.Built-in 2MegaBytes flash memory for data transfer ,data reserved even the power is shut down.
3.USB flash disk with Large capacity is supported, all the files in USB flash disk are input to the machine possibly. After the USB flash disk is pluged in converter, first 1.44MB/1.20M/720K of files under the root directory in USB disk are read into 2.MB built-in flash memory auto, while the total files under root directory are exceed the 1.44MB/1.20M/720K capacity, you have to press the read-in button, to flush the files in 2MB built-in memory with next 1.44MB/1.20M/720K files under root directory. Through this process ,you can read all the files in USB disk.
4.Most of machine with floppy driver are supported.
NOTE: please show me the infomation (such as model,capacity,interface and jumpers beside power pulg) of floppy driver on your machine before you pay.
