EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE   >   Merrillville   >   Heavy Machinery   >   Electrical   >   AC Single Phase   >   Parkermp 50A plasma 200A acdc tig stick welds aluminum

Parkermp 50A plasma 200A acdc tig stick welds aluminum


Parker Metalworking Products PT50/200ACDCTSSV
(Technical Modifications Designed by Parker Metalworking Products a division of Diversified Technology 2004 - 2009 and modified in the USA at our facilities)
*** WE ARE THE ONLY SELLER THAT UNDERSTANDS ELECTRONICS THEORY OF OPERATION OF EVERY CIRCUIT OF THESE CHINESE MACHINES ***
*** WE HAVE A COMPLETE REPAIR FACILITY AND TROUBLESHOOT TO THE COMPONENT LEVEL... NOT JUST REPLACE BOARDS AND CLAIM TO BE EXPERTS ***
*** WE IMPORT BASE MACHINES AND APPLY OUR OWN TECHNICAL MODIFICATIONS, DESIGNED TO IMPROVE PERFORMANCE AND RELIABILITY OVER AND ABOVE THE ALREADY GOOD PERFORMANCE OF THE BASIC MACHINE! ***
*** THE ELECTRONIC DESIGN OF THESE MACHINES ARE EXCEPTIONAL!!! HOWEVER, THE TRUTH IS THAT CHINA DOES HAVE A PROBLEM PRODUCING RELIABLE PRODUCTS CONSISTANTLY. SO... ALTHOUGH THE DESIGN IS VIRTUALLY THE SAME WITH ALL THE MACHINES BEING SOLD BY VARIOUS SELLERS... THE QUALITY OF CONSTRUCTION CAN BE A BIG ISSUE... UNLESS ONE KNOWS WHAT TO DEMAND FROM A TECHNICAL STANDPOINT... AND WE DO!!! ***
*** THOSE THAT PLACE HIGHEST VALUE ON THE LOWEST PRICE... DESIRVE WHAT THEY GET! ***
*** THE PEOPLE THAT DO THEIR HOMEWORK... DESERVE A MACHINE FROM PARKER METALWORKING PRODUCTS! ***
*** WE'RE IN YOUR FACE SERIOUS ABOUT OFFERING GREAT MACHINES AT GREAT PRICES, BACKED BY A GREAT WARRANTY TO PROVIDE GREAT VALUE! HELL... WE'RE JUST GREAT!
IT AIN'T BRAGGING IF IT'S TRUE... AND IT IS... TRUE!!! ***
Click Here... To Watch a VERY NICE! 1/2" CUT (NOTICE, NO HEAT SIGNATURE!)
Click Here.. To Watch 3/4" Long Cut. WATCH THIS!
Click Here... To Watch Aluminum Weld In Action! Video #1
Click Here... To Watch Aluminum Weld In Action! Video #2
Click Here... To Watch Aluminum Sheetmetal Cut!
Click Here... To Watch Cut Using Straight Edge!
Click Here... To Watch Inside Cut 3/8" Angle Steel (Dirty!)
Click Here... To Watch Cut Paint/Rust 1/4"!
Yep... true (not just a label) 50amp plasma cutter OUTPUT, 200 amp OUTPUT ACDC TIG/Stick combination. Only 40 lbs, only draws 25 amps maximum, with a quality cut of 3/4 and will sever 1". Note: Our PT31 torch comes equipped with long Tips & Electrodes to quality cut
Foot Pedal INCLUDED (OUR CONTROLLER!)
We include our controller that provides proper dynamic control especially at low current settings where you want and need precision.
Just set the maximum current for the Foot Pedal (Foot Pedal Down) with the front panel control. The foot pedal will provide you with dynamic current control from minimum to that maximum. So you can see that as you lower the maximum/Foot Pedal Down setting, the foot pedal precision increases, providing the precision needed and desired for thin welds. With our controller the Foot Pedal resolution is adjustable.
Other sellers of similar machines only provide a simple bypass of the front panel current control. Which means the foot pedal will only control output current from minimum to the MACHINE S maximum. The Foot Pedal maximum current is NOT adjustable therefore the resolution of the foot pedal cannot be adjusted, which makes it virtually useless for thin welds.
* 50 Amp Plasma Cutter, 200 Amp ACDC TIG/Stick Welder (Stick has reversible polarity function)
(NOTE: This machine can be purchased as a 40/160 version for a smaller price)
* Air Regulator/Moisture Filter for Plasma
* Plasma Torch PT31 Standard. (Great torch, inexpensive consumables, reversible/dual-use electrodes)
* TIG Torch (With gas lenses, electrode collets sizes, long and stubby tailpieces)
* Agron Regulator/Flow Meter (Accurate Floating Ball Type)
* Stick/Arc Welding Rod Holder, Cable, Connector Assembly
* Workpiece Ground Clamp, Cable, Connector
* Foot Pedal (heavy metal construction) with OUR controller. Very Important!
* 3 Year Warranty (no hype) (1 Year Labor, 3 Years All Electronic Parts)
* Technical Support (Phone or Email) We understand complete electronics theory of operation of all circuits in all our machines. Our competency is based upon extensive technical education and 34 years experience repairing and designing electronic equipment of all kinds. (The fact is, an easy problem for us is a difficult problem for those sellers that are not qualified in electronics. Should you need technical support you want solutions to be provided by a simple phone call or email if possible)
Feel free to call 888.281.2820 or 480.983.6030 with your technical questions, We welcome them!
___PROMOTIONAL PRICING__________________________________________________________
BE SURE TO CALL US 1-(***)-281-2820 OR EMAIL US AT ****@yahoo.com WITH QUESTIONS... WE GIVE SPECIFIC ANSWERS!



Parkermp 50A plasma 200A acdc tig stick welds aluminum Parkermp 50A plasma 200A acdc tig stick welds aluminum Parkermp 50A plasma 200A acdc tig stick welds aluminum Parkermp 50A plasma 200A acdc tig stick welds aluminum Parkermp 50A plasma 200A acdc tig stick welds aluminum Parkermp 50A plasma 200A acdc tig stick welds aluminum