EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE   >   Merrillville   >   Heavy Machinery   >   Electrical   >   AC Single Phase   >   240v   >   Keg coat quick chill wrap cooler draft beer kegerator

Keg coat quick chill wrap cooler draft beer kegerator


The Keg Coat Quick Chill Wrap (Patent Pending) is a reusable Keg Wrap that will keep beer kegs cold for many hours eliminating the need for bag after bag of Ice.
Chills a full Keg from Room Temperature to 35 Degrees Fahrenheit in just 40 minutes.
Quick Link: http:// /watch?v=PEfA4PoxBoQ
The Keg Coat is made of a specially designed sheet of gel packs which are placed in the freezer prior to use. The Gel pack sheet is inserted into a proprietary nylon blend jacket which is wrapped around the keg and held in place with Velcro. The Keg Coat is designed to fit a standard size half-barrel keg (Canadian or U.S. kegs), but can also be used effectively on smaller sized keg too. Just wrap it around the smaller keg so that the Keg Coat overlaps itself. This will cause a smaller keg to get colder even faster and stay cold even longer.
Not only is warm beer unpleasant to drink, warm temperatures are the enemy of unpasteurized keg beer. Unless keg beer is kept cold, once the keg is tapped, the beer inside can go bad in only a few hours. Dormant bacteria becomes active above 55 degrees Fahrenheit. Plus a manual keg pump introduces air into the keg. Oxygen from the air will react more quickly with the beer inside if the beer is warm causing the beer to go bad more quickly. The Keg Coat will keep the beer cold longer, keeping it fresh for as long as possible. This means less waste.
One keg contains the same amount of beer as almost seven cases of bottled beer. Keg beer is much more cost effective than bottled/canned beer as long as all of the keg beer is usable. Plus there are no bottles or cans to clean-up and return at the end of your party or event.
No need for Ice, Reusable Gel Pack, More Fresh Beer and No Bottles or Cans = Less Cost!!
If you throw a function and the beer kegs show up just in time or even a little late, the Keg Coat will chill the keg to a perfect temperature quickly and efficiently. It may just save your party or event.
Perfect for Parties, Special Events, Company Picnics, Tailgate Parties, even in a restaurant or bar when the built-in cooling system fails. Anywhere you want to use a keg but can't use normal refrigeration.
In a restaurant or bar, if the Keg Coat saves even one keg of beer from going bad after a cooling system failure, it has paid for itself many times over. Plus draft beer can continue to be sold until the cooling system can be repaired, even days later.
Tightly wrapped, an empty Keg Coat will stay cold while being transported to where it will be used. Even better, place the Keg Coat in a standard cooler during transportation. For outside events held on very hot days, a second back-up Keg Coat will ensure that your keg beer never gets warm.
Even if you aren't going to use a keg for your party, wrapping the Keg Coat around a drum approximately the size of a keg makes a perfect cooler for your bottles and cans. The Keg Coat will keep the ice in the drum from melting much much longer.
Free Local Pick-up in Richmond Hill, Ontario Canada. (***) 229-4340



Keg coat quick chill wrap cooler draft beer kegerator Keg coat quick chill wrap cooler draft beer kegerator Keg coat quick chill wrap cooler draft beer kegerator Keg coat quick chill wrap cooler draft beer kegerator Keg coat quick chill wrap cooler draft beer kegerator Keg coat quick chill wrap cooler draft beer kegerator Keg coat quick chill wrap cooler draft beer kegerator Keg coat quick chill wrap cooler draft beer kegerator