EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Self Propelled
> Air Brakes
> Under 150 PSI
> Liquid epoxy resin adhesive kit, 24 lbs, almost 3 gal.
Liquid epoxy resin adhesive kit, 24 lbs, almost 3 gal.
Almost three gallons of Pure liquid epoxy resin and hardener, 24 pounds net.
The curing agent/hardner is 8 pounds of variable ratio, medium viscosity, curing agent, with a yellow tint, packaged in a one gallon plastic pail. This kit is 100:50 mix ratio by weight.
The curing agent is a versatile curing agent that can be used with this resin in as low a ratio as 33 to 100 by weight (more ridged) and as high a ratio as 67 to 100 (more elastic.) When mixed with pure epoxy resin this kit is right in the middle of the ratio range.
This is a slow curing epoxy system, (24 hours to reach about 90% cured) that must be used above 60 degrees F to avoid problems with it attracting moisture. The pure epoxy resin is clear and the hardener is amber/clear which make the finished epoxy clear with a yellow tint to it.
These materials are both quite thick, they WILL NOT wet a fiberglass cloth or mat well, they are too thick, plus they cure very slowly so it will run on a slopped surface.
This mixture can be filled with aluminum powder or chopped fiberglass that I sell. Please check out my other epoxies and other items.
