EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Self Propelled
> Air Brakes
> Under 150 PSI
> Cola tl non acid concrete stain one gallon envirostain
Cola tl non acid concrete stain one gallon envirostain
ENVIRON STAINS ARE A UNIQUE LINE OF WATERBASED, NON-ACID POLYMER
BONDED STAINS THAT PENETRATE INTO THE CONCRETE
SURFACE TO PRODUCE VIBRANT LONG LASTING UV RESISTANT COLORS
THAT ENHANCE ANY CONCRETE SURFACE.
Enviro-Stains contain no arsenic, lead, or mercury and very low organic solvents that conform to all VOC regulations.
The Enviro-Stains are applied to any clean, cured concrete surface or concrete overlay surface. Once dried and sealed, the various colors that are applied become a permanent part of the concrete with lasting beauty.
UV Stable: Once dry and sealed, the Enviro-Stains remain stable and resistant to weather and sun light for years.
A wide range of colors: The Enviro-Stains at various dilutions and combinations can offer a multitude of colors and shades for any desired effect in beautifying plain concrete surfaces. This includes a true black and white.
Ease of application: The Enviro-Stains do not require any neutralizing or labor intensive scrubbing. Once dry they can simply be sealed. Half the labor is eliminated.
Economical: The stain covers up to 200 ft2/gal and one coat is usually sufficient.
1. Clean the concrete surface to make sure it is free of any topical coatings, oil, grease or dirt stains.
2. Apply the stain with a brush, sponge, or plastic sprayer in the color and technique of your choice. Do not over apply or allow to puddle.
3. Allow floor to dry thoroughly. Drying time will vary according to the surface conditions and humidity.
4. Apply a sealer to enrich the color and protect the surface.
We would like to recommend the use of Eviro Seal to provide a protective sealed coat.
Check our other items for sale!
Enviro Seal is $32.95 a gallon.
