EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Self Propelled
> Air Brakes
> Turbine pump, bronze-fitted, 1/2 hp, 1 phase
Turbine pump, bronze-fitted, 1/2 hp, 1 phase
Turbine Pump, Bronze-Fitted, 1/2 HP, 1 Phase, Voltage 115/208-230, Inlet 1 In., Outlet 1 In., Max. Pressure 300 PSI, Length 15 15/16 In., Height 6 1/2 In., Width 6 1/2 In.
* Bronze Impeller Turbine Pumps
* Uses: For Industrial and commercial applications, boiler feed, condensation return, pressure service, water treatment, reverse osmosis filtration, spray equipment, and liquid transfer.
* 3450 RPM ball bearing motors
* Require less horsepower to pump low flows (1 to 41 GPM) at high pressures; handle vapors to 20% by volume to minimize vapor lock.
* With self-venting top vertical discharge, end suction connections, and standard NPT threaded suction and discharge ports. All have Buna N O-ring gaskets, mechanical seals with Buna N and stainless steel parts, and carbon/ceramic seats. Impeller balancing holes help eliminate side wear and the need for external adjustment. Cast iron cover and motor bracket with electroless nickel plating and replaceable bronze shaft sleeve.
* Liquid temp. range: -20 Degree to 230 DegreeF
* Max. casing pressure: 300 psi
* Meet NPSH requirements for low vapor pressure and near-boiling fluids
* Motor Type: Cap-Start, ODP
* Wetted Materials: Cast Iron, Bronze Fitted
* Volute Material: Cast-Iron, Bronze Fitted
* Seal Material: Carbon, Ceramic, Buna
* Seal Application: Low Flow, High Head
* Max. Liquid Temp. (F): -20 to 230
* Best Efficiency GPM @ Head (Ft.): 4.8 GPM @ 95 PSI
* Best Efficiency Range GPM @ Head (Ft.): 4.3-6.0 GPM @ 120-43 PSI
* Max. Specific Gravity: 1.00 SP
* Max. Case Pressure (PSI): 300
* Max. Fluid Viscosity: 250 SSU
* Impeller Type: Regenerative Turbine
* Bearing Type: Sealed Ball Bearing (Motor Bearing)
* Max. Dia. Solids (In.): 25 Microns
* Port Rotation: 90 Increments
* Drain Plug: 180 From Inlet Port
* Agency Compliance: UL and CSA on Motor Only
* Application: For Boiler Feed and Condensate Return Service, Low Flow, Pumping Clean Fluids, Nonflammable Liquids Compatible with Pump Component Materials
* Construction: Bronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve
* Includes: Cast Casing with Bronze Impeller
