EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Self Propelled
> Air Brakes
> Above 150 PSI
> 2 ch electric magnetic lock 300LB with wireless remote
2 ch electric magnetic lock 300LB with wireless remote
2 Ch Electric Magnetic Lock 300lb with wireless remote
(2) 300LB Electric Magnetic Lock
(1) Seco-Larm SL-SK-910R2 Two Channel Wireless RF Receiver
(2) Seco-Larm SL-SK-919TD2A-UP 2 CH wireless Transmitter
Seco-Larm Enforcer SL-SK-910R2 Two Channel RF Receiver:
* Compatible with all SECO-LARM transmitters.
* Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
* Two FORM-C dry relay contact (N.O./N.C./COMMON) outputs. Rated 10 Amps at 24 VDC.
* This revolutionary receiver incorporates:
-1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
-2.HIGHER SENSITIVITY for greater operating distances.
-3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
-4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
* 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared.
* 2 Mode switches (one for each channel) for easy transmitter learning.
* Learns up to 30 transmitters (15 for each receiver channel).
* 4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Validity
(Validity: receiver outputs for as long as the transmitter button is pressed).
* Screw terminals for simple connection.
* Accepts SECO-LARM fixed code or CODEBUMP transmitters.
* SK-910R2-4: Same as SK-910R2, but 433.39MHz.
SECO-LARM CODEBUMP Technology
Be prepared for today's thieves with SECO-LARM's patented CODEBUMP technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.
60mA per channel at 12VDC (activated)
68 billion codes (SK-919TD1S-UP
Number of Stored Transmitter Codes
15 Per Channel, 30 per receiver
Two form "C" dry relay contacts (N.O./N.C./Common); 10 Amps at 24VDC
Programmable 4-sec. momentary (default), 1-sec. momentary, toggle or validity
8 Quick-connect screw terminals (+, -, with N.O./N.C./Common for channel 1 and N.O./N.C./Common for channel 2)
31/4" x 33/8" x 11/8" (83 x 85 x 28mm).
Seco-Larm Enforcer SL-SK-919TD2A 2 Channel Wireless RF Transmitter:
* Over 68 billion (6.8 x 1010) possible codes.
* Sleek new case with flashing LED transmission indicator.
* Includes 12VDC alkaline battery with handsome key chain ring.
Primary: 120 Volt 60 Hz (Black Housings)
All 12 VDC models have A 6' line cord and center positive plug/individually boxed
12DC500, 12 VDC, 500 MA, 2.1 MM Coax. Plug, UL/CSA Approved
This illuminated button is mounted on a metal plate that can be secured to a wall near the door it effects. The wide operating temperature range makes it suitable for a number of environments.
Durable stainless steel plate
1M cycles min. rated switch life
Single pole NO/NC momentary contact switch
Contact rating: 300VAC/3A max.
Operation Temperature: -20 C ~ 55 C (-4 F ~ 131 C)
Dimensions: 120mm x 76.2mm x 82mm (4.72" x 3.00" x 3.23")
* Ensure that you strip all of the transformers.
* One transformer is for the wireless remote and the other one is for the mag lock.
* When installing the wireless remote to the mag lock, make sure you use 18/2 gauge wire.
* When installing the mag lock please make sure that the strike is not too tight. Keep the strike as loose as possible so it can make the proper contact with the lock.
* For further Install Instructions please take a look at the manuals provided below.
BEFORE PURCHASING, PLEASE MAKE SURE TO READ ALL THE MANUALS LISTED BELOW AND ASK ANY QUESTIONS THAT YOU MIGHT HAVE.
Manuals and Documentations(when available):
Electric Magnetic Lock Install Instructions Part# 1.pdf (278184 bytes)
Electric Magnetic Lock Install Instructions Part# 2.pdf (278184 bytes)
SK-910R USER MANUAL.pdf (118189 bytes)
How to code the transmitter.pdf (509619 bytes)
Typical Receiver Applications.pdf (14477 bytes)
