EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Heavy Machinery
> Electrical
> High Frequency Converters
> Under 1 MhZ
> UCC27322 gate driver for mosfet / igbt 9A hi speed DIP8
UCC27322 gate driver for mosfet / igbt 9A hi speed DIP8
Gate Driver for Power MOSFETs and IGBTs
Does one thing, and does it very well: Turn MOSFETs and IGBTs hard ON, to attain their lowest specified Rds(on). (good luck attaining it otherwise).
Turns them ON FAST, and turns them OFF FAST.
It will both source and sink current from MOSFET gates to provide fast switching.
Supply of 4 to 18V, 0.6 Amp continuous output current. 9A peak charging current into capacitive loads. Takes a logic level as input ( 3 to 18V logic high state), and it switches high powers on output.
Rise time / Fall time 20 ns into 10,000 pF capacitive load
Can be used to drive other loads: motors, transformers, horn speakers (very loud alarm), signal generators, anything that can handle square waves.
Internally Schmitt-triggered logic states produce decisive switching even for slow rising signals.
* High-Peak Current Drive Capability of 9 A at the Miller Plateau Region Using TrueDrive
* Efficient Constant Current Sourcing Using a Unique BiPolar & CMOS Output Stage
* TTL/CMOS Compatible Inputs Independent of Supply Voltage
* 20-ns Typical Rise and Fall Times with 10-nF Load
* Typical Propagation Delay Times of 25 ns With Input Falling and 35 ns with Input Rising
* 4-V to 15-V Supply Voltage
* Available in Thermally Enhanced MSOP PowerPAD Package With 4.7 C/W jc
* Rated From 40 C to 105 C
* Pb-Free Finish (NiPdAU) on SOIC-8 and PDIP-8 Packages
* Switch Mode Power Supplies
* Class-D Switching Amplifiers
* Pulse Transformer Driver
UCC27321 also available, the INVERTING version of this driver
