EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Heavy Machinery
> Electrical
> AC Three Phase
> High Voltage
> New dual digital f/c pid temperature control controller
New dual digital f/c pid temperature control controller
PID Digital Temperature Control Controller F/C CD101
Cold-end compensation tolerance: 2 can be modified by software in 0~50
Process value (PV), Setting value (SV)
Output, alarm and self-tuning can be indicated by: LED
1. PIN control (including ON/OFF, step-type PID and continuous PID)
1. Relay output: contact capacity 250V AC 3A (resistive load) (Refrigeration)
2. Voltage pulse output: 0/12V (suitable for solid state relay SSR) (Heating-up, a 12V relay needed)
3. Alarm function output: 1 way
Contact capacity of output: 250V AC 3A (resistive load)
Setting value (SV): identical to measuring range (PV)
Proportional band (P): 0~full range (ON/OFF control when set to 0)
Integral time (I): 0~3600 sec (No integral action when set to 0)
Derivative time (D): 0~3600 sec (No derivative action when set to 0)
Heat-reset proportional cycle: 1~100 sec
Detective temperature range 0 to 400
1. Insulation resistance: >50M ohm(500V DC)
2. Insulation resistance: 1500V AC/min
4. Service environment: 0~50 , environment with no corrosive gas 30~85% RH
*Only clean the instrument when power off
*Please use a soft cloth or cotton paper to clean up the stain on the display
*Do not clean up or touch the display by hard matters in case of any scratch
*Never use sharp & hard matters such ass screwdrivers or ball pan to touch the buttons on the panel, in case of any scratch or damage.
1 X PID Digital Temperature Control Controller F/C
How to make the PID controller display in F
