EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Heavy Machinery
> Electrical
> AC Three Phase
> 230v
> T-berd 2310 FST2310 DS1/3-OC12 TTC2000 callibrated
T-berd 2310 FST2310 DS1/3-OC12 TTC2000 callibrated
JDSU/Acterna FST-2310 TestPad. It is an All-in-One testing solution that performs SONET, SDH, T-Carrier, Data, and Circuit Switched testing from Transmission Rates of DS0 to OC-12c in a single Hand-Held Unit. It has multiple operation modes to terminate and monitor circuits from various network access points. It has an easy to use touch screen graphical user interface (GUI) simplifying and expediting testing setup and operation. It is engineered for field use, is lightweight and has battery powered operation if needed. It comes with AC Adapter, Handset with cord, Printer Cable, FC to ST Adapter cables, Soft Carry Case, the Nickel Metal Hydride Battery, and the Users Manual.
* Some Features and Applications include:
* Perform end-to-end BER testing using a wide range of stress test patterns
* Analyze network performance by simulating abnormal conditions and inserting various errors and alarms
* Perform in-service monitoring of the circuit under test to ensure quality of service
* Verify proper provisioning of network multiplexers and demultiplexers
* Perform bulk payload testing on SDH circuits at the STM-1c/4c/16c rates
* Multirate transmission testing from DS0 to OC-12c in a single hand-held unit
* Ability to manipulate bytes in the SONET overhead
* Multiple operation modes to terminate and monitor circuits from various network access points
* Application-driven icons, auto configuration, dual PCMCIA slots, built-in microphone, speaker and additional handset port
-Test optical interfaces at OC-12/12c, and OC-3/3c rates
-Test electrical interfaces at STS-1, DS3, and DS1 rates
-Perform bit error rate tests on SONET/DS3/DS1 circuits
-Manipulate SONET overhead bytes with an easy-to-use interface and analyze network performance under abnormal conditions
-Perform bi-directional monitoring of STS-1/DS3/DS1 circuits
-Monitor and test ATM circuits and verify quality of service measurements
-Place and receive calls on an ISDN PRI circuit and test non-facility associated signaling (NFAS) and backup D-Channel circuits
-Monitor GR-303 protocol links for proper configuration and collect call statistics
-Analyze signaling bits on a T1 voice trunk and place and receive calls
-Use VT100 emulation to configure and monitor network elements
