EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Heavy Machinery
> Electrical
> AC Single Phase
> 240v
> Omega CL8500 high accuracy multifunction calibrator
Omega CL8500 high accuracy multifunction calibrator
CL8500 Series calibrators are high accuracy instruments:
0.005% accuracy with 600,000 measuring counts on
voltage and current ranges. A full graphics backlit LCD
display simultaneously indicates measured and output
values. Numerous other functions such as measurement
memory for 1000 data points, signal linearization and
transmitter function make the CL8500 Series unequaled in
the area of test and calibration.
Accuracy: all stated values expressed in (% rdg + n digits)
@ 23 C 1 C (73 F 2 F) ambient. Accuracy values for
90 days are approx. half the stated values for 1 year
Display: full graphics backlit LCD display, 600,000 counts
Languages: English, French or German menu prompts
Temperature Units: user selectable, F/ C/K
Configuration Memory: store up to 5 configuration programs
RS-232C: 300 to 19200 baud, 7 or 8 data, 1 or 2 stop bits,
even, odd, ignore or no parity, XON/XOFF, DTR/CTS or no protocol
IEEE-488: 31 available addresses
Common Mode Voltage: 250 V max between earth and terminals
Operating Ambient: -10 to 55 C (14 to 131 F), 10 to 80% RH
Power: 115/230 Vac 10%, 50-60 Hz
Alarms: two alarm setpoints, audible beep
and relay output (two SPDT relays rated
Peak and Valley Memory: simultaneous
y = mx + b or 9-segment linearization
Digital Filter: programmable, to facilitate
Trigger Function: triggers one by one
data acquisition or burst acquisition
Measurement Memory: store up to 1000
measurements in one burst, or up to 128
Analog Output: 0 to 2.5 V programmable
analog output (into load > 2.5 k ), 10 mV
(256 counts) resolution, 10 mV accuracy
Simulation Values Memory: 100 signals
Step Function: amplitude, direction, and
Ramp Function: values and intervals,
Synthesizer Function: manually or
automatically recall stored output values
measurement to 4 to 20 mA or 0 to 10 V
