EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Heavy Machinery
> Electrical
> AC Single Phase
> 240v
> Handheld anemometer wind speed/temp meter sailing H3C
Handheld anemometer wind speed/temp meter sailing H3C
Pocket Electronic Wind Speed Gauge Anemometer & Thermometer Meter
1.Wind speed & temperature measurement
3.Temperature display in Celsius or Fahrenheit
4.Different wind speed measurement unit
5.Measure wind speed in: Current/Average/ Max
1.Put battery into battery compartment, LCD will blink all display for a second.
2.Recover battery door, push MODE in 1 second to turn on the unit LCD will display wind speed, temperature and battery icon. LCD backlight will lasting for 12 seconds.
3.Setting different wind measurement: Push MODE for 3 seconds until "m/s" start to blink. Push SET to selet desired measurement unit to confirm the desired measurement unit by push MODE.
Digital symbol: m/s meter per seconds; km/hr kilometer per hour; ft/min feet per minute; knots nautical mile per hour; mph mile per hour; Cu Current wind speed, MAX max wind speed, average average wind speed.
4.C/F Switch option: Press the C/F key to select different temperature unit.
5. Press any key will active LCD back-light for 12 seconds.
6. Measurement: when the wind vane (impeller) turns, LCD will instant display wind speed and temperature. When temperature below 0 C, wind chill symbol will shown on the LCD.
7. Push SET to turn off the unit
Operating temperature: -10C-45C(14F-113F)
Store temperature: -40C -60C (-40F-140F)
Current consumption: About 3mA
Weight: 53g (with battery land yard)
* 1* Wind Speed Gauge Anemometer
