EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Heavy Machinery
> Electrical
> AC Single Phase
> 110v
> Frymaster electric fryer heavy duty 50 lb oil capacity
Frymaster electric fryer heavy duty 50 lb oil capacity
FRYMASTER ELECTRIC FRYER HEAVY DUTY50 LB. OIL CAPACITY SOLID STATE
Model H114 SD Our Price: $999.00
List Price: $6,500.00 Other Retailer's Price: $3,500.00
This is a Frymaster Electric Fryer floor model H114 SD. This unit is enhanced for industry leading efficiency, convenience and serviceability. It has a minimum 40-lb. (20 liters) and maximum 50-lb. (25 liters) shortening capacity. The frying area is 14" x 15.50" (356 x 394 mm). Solid-state controls assure pinpoint accuracy of shortening temperature, extending shortening life and producing a uniformly-cooked product. The temperature sensor mounted on the elements permits rapid response to loads. Self-cleaning electric elements have low watt density for increased reliability and extended life. The swing-up elements provide the best possible efficiency in transferring heat. They swing up to expose the open frypot, allowing every inch of the frypot to be cleaned and wiped down by hand. The deep cold zone catches crumbs and sediment from the frying area. These particles are trapped in the cold zone where they do not carbonize, contaminate shortening or cling to fried foods. Unit is 208 volts, 60 Hz, 14.0 Amps, and 3 phase. Unit has been tested and works fine. You will not be dissapointed.
This Unit Is A Heavy Duty 50 lbs. Shortening Capacity Fryer!
* Ultra high energy efficiency
* Open-pot design easy to clean
* Rotating, swing-up, ribbon type, long-life heating elements
* Solid state controls assure efficient heat transferdjustable
* Centerline temperature sensor
* Boil-out mode for easy cleaning
* Stainless steel frypot
* Stainless steel cabinet
BRAND FRYMASTERMODEL ELECTRIC FRYERMODEL# H144 SDOUTSIDE DIMENSIONS 46"H X 16"W X 30"DELECTRICAL SPECS 208 V / 60 Hz / 14.0 Amps / 3 PhWEIGHT 200 Lbs
Call us at (***) 398-8000 email us at: ****@onelinkpr.net
