EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Heavy Machinery
> Components
> Banner D12SP6FVQ din rail high power fiber optic sensor
Banner D12SP6FVQ din rail high power fiber optic sensor
* D12s are compact, totally self-contained visible-red fiber optic sensors for DIN rail mounting. Standard D12FP and D12FV plastic and glass fiber optic sensors offer fast 0.5 millisecond (500 s) response.
* Protected against reverse polarity and transient voltage
* Output Rating 150 mA max. each output; total load may not exceed 150 mA
* Repeatability 130 microseconds
* All models operate from 10-30VDC, 45 mA Max
* PNP complementary outputs (one output normally open, one output normally closed). The normally closed output of FP and FV models (only) may be used as a diagnostic alarm output, depending upon the hookup of the sensor to the power supply.
* 6" pigtail with a pico-type quick disconnect connector.
* Designed for glass fibers.
* Two top-mounted LED indicators light to indicate POWER ON and NORMALLY OPEN OUTPUT CONDUCTING conditions.
* On all D12 sensors operating in the 500 s (standard) response mode, a red seven-segment moving-dot LED bargraph lights to indicate the relative strength of the received light signal. This feature can greatly simplify sensitivity adjustment and the task of fiber optic alignment, as well as provide a constant reference over time for overall sensing system performance. In all models and in both response modes, segment #1 of the bargraph flashes to indicate an output overload. On all sensors operating in the 500 s response mode, segment #7 flashes to indicate marginal excess gain. On standard (FP and FY) models, a flashing LED corresponds to the "on" state of the D12's alarm output.
* D12s have a 15-turn SENSITIVITY control, with a slotted brass screw clutched at both ends of travel.
* D12s are constructed of rugged black ABS. The transparent housing cover is acrylic. All D12 sensors are rated NEMA 2.
These came in a lot of spare parts so they may have some tiny light cosmetic marks on the body and some of the little rubber grommets where the cord enters the sensor body have cracks or pieces missing, but the cords seem securely attached-I have lowered the price of these accordingly. These are otherwise spotless and all include the retaining clip. These do NOT include any Fibers or the mounting bracket. The controls, fiber connections, rail attachment features, cables & cable connectors are all like new and these are clean.
