EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Agricultural and Construiction
> Fertilizer Production and Distrobution
> Silver-flo 55 silver solder rod 1.5MM x 600MM BRAZING10
Silver-flo 55 silver solder rod 1.5MM x 600MM BRAZING10
Silver-Flo 55 Silver solder rods
Size : 1.5mm Diameter x 600mm Lenght
Silver-flo 55 is a cadmium free silver brazing filler metal. It combines a low brazing temperature with a short melting range. Silver-flo 55 is very free flowing and produces neat joints with small fillets. These characteristics make Silver-flo 55 an excellent general-purpose silver brazing filler metal. In many countries it is accepted as the best cadmium-free alternative to the low-melting cadmium containing filler metals. For example, it is used as a substitute for alloys such as Easy-flo and Easy-flo No.2.
Joints made with Silver-flo 55 are suitable for seawater applications, being resistant to dezincification. The optimum joint gap for this filler metal at brazing temperature is normally 0.05-0.15mm.
Conditions for use: This filler metal is mainly used for brazing in air with a flux. In most cases Easy-flo flux can be used in conjunction with Silver-flo 55. However, flux selection is application dependent. Please refer to JM technical department or flux product datasheets before selecting a flux.
