EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Agricultural and Construiction
> Fertilizer Production and Distrobution
> Nsk nakanishi high speed milling spindle HES510-NT30
Nsk nakanishi high speed milling spindle HES510-NT30
Nsk Nakanishi High Speed Milling Spindle HES510-NT30
ULTRA PRECISION HIGH SPEED MILLING SPINDLE HES510-NT30
Upgrade your existing NC Milling machines and CNC machining centers to high speed machines.
The Ultra-Precision, High-Speed HES510 spindles allow you to use your existing equipment for a much larger variety of operations. Conventional milling machines and machining centers can now do high-speed machining, small diameter drilling and milling with extremely good surface finishes with the HES510.
Collet Nut (K-265) : Provided Wrench (12 x 14) : 2 pcs.
*Collet and motor cord sold separately.
HES510-NT30 High Speed Milling Spindle Specifications
Speed 5,000-50,000 min-1(rpm)
The HES510 motor is a brushless DC motor that utilizes hall elements and rare-earth magnets to realize max. output 250W in a very compact size.
The spindle uses a double pair of ceramic bearings in the front and in the rear. This arrangement maximizes both radial and axial rigidity to insure extremely high-precision cutting.
The motor also uses ceramic bearings to maximize life expectancy.
One-Piece motor and spindle construction
The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines.
The system incorporates an emergency, breakaway connector to help prevent system damage in case the machine's main spindle is rotated accidentally.
Excellent Durability by air-cooling system
Air-cooling motor uses a small volume of air (1.0 CFM) to prevent heat buildup and allow long, continuous operation.
Best for small diameter drilling and milling
Less than 0.08" ( 2 mm) small diameter drilling and milling with extremely good surface finishes, using a high-speed brushless motor.
Clean dry air is required to cool the motor and protect the spindle from contaminants. Please use a filter and regulator.
(Proper air pressure 28-42PSI) (Use Air Line Kit AL-0201)Optional
Large Variety of Tapers Available
BT, NT, CAT, IT, ST32, R8 and HSK A tapers are available. (Optional)
The control unit is compact and lightweight. It features a protection circuit to stop the motor automatically in case of overload ensuring safe and smooth operation.
