EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > East Chicago
> Self Propelled
> Air Brakes
> Heyco 8382
Heyco 8382
Liquid Tight Conduit Fittings, Straight-Thru, Snap-In Hubs
For Flexible, Nonmetallic Liquid Tight Conduit and Tubing
* Assembly friendly! The installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be snapped into the panel with fingertip pressure.
* No threading of the conduit or tubing required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
* Complete conduit/fitting system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
* Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
Temperature: 257 F (125 C) Maximum temperature on part not to exceed 221 F (105 C) A qty 1 = 50 Conduit Fittings
