EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > East Chicago
> Heavy Machinery
> Electrical
> AC Three Phase
> 230v
> Seco-larm e-942FC-600 gate electric magnetic lock
Seco-larm e-942FC-600 gate electric magnetic lock
Seco-Larm E-942FC-600 Gate Electric Magnetic Lock
Seco-Larm E-942FC-1300 Gate Electric Magnetic Lock
600lb UL listed Water and Vandal-resistant
* Ideal for indoor and outdoor applications, even in severe weather.
* For slide or swinging gate.
E-942FC-600 - 600lb. (272kgs).
* Water-resistant and vandal-resistant attractive stainless-steel finish.
* Maintenance-free, factory-sealed design.
* Fail-safe operation (unlocks door when power is removed).
* Dual-threaded conduit fitting - 3/4" outside diameter, 1/2" inside diameter.
E-942FC-600 - 8" x 2-11/16" x 1-9/16" (203 x 42 x 39 mm).
E-942FC-600 - 6-1/4" x 1-3/8" x 5/8" (159 x 41 x 16 mm).
* Complete mounting hardware included.
* "L" and "Z" brackets available (see below).
* Input voltage 12VDC or 24VDC.
Current draw 500mA @ 12VDC, 250mA @ 24VDC.
* The "Z" brackets attach to the armature plate and are typically used in certain types of swinging gate installations. The "Z" brackets consists of two parts and are adjustable for flexible positioning of the armature plate.
* The "L" brackets consist of two "L" brackets. They are attached to the magnet and armature plates. These "L" brackets can be used in a variety of gate applications including sliding gates.
Installation Manual for E-942FC-1300 and 600.pdf (145850 bytes)
