EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > East Chicago
> Heavy Machinery
> Electrical
> AC Single Phase
> 240v
> Viking pump - classic industrial lobe pump model CP20S
Viking pump - classic industrial lobe pump model CP20S
* THEORETICAL DISPLACEMENT PER 100 REV 10.71L
* NOMINAL PUMP RATING 190 L/MIN., 48GPM, 950 RPM
* MAXIMUM HYDROSTATIC PRESSURE 20 BAR, 300 PSIG
* MAXIMUM TEMPERATURE 150 C, 300 F
* WEIGHT, LESS VALVE (LESS POWER) 28 KG, 62 LB.
* Viking Pump - Classic Industrial Lobe Pump model CP20S, Nominal Capacity 10.90 M /Hr (48 GPM) @ 950 RPM
Viking Classic+ Advantages
The Classic+ rotary lobe pumps use timing gears to eliminate contact between the rotors, which makes them ideal for use on non-lubricating fluids. These pumps offer industrial and sanitary/hygienic designs which are ATEX, 3A and EHEDG compliant, with bearings on both sides of the rotors for higher pressure capabilities.
Classic+ Pump Design Maximizes Drainability and Cleanability with:
Front loading seal design minimizes dead areas
No bushings in liquid eliminates contamination ensuring product integrity and simplifies maintenance
Flush, front face rotor retainers eliminate recesses in head
O-ring seals at shaft splines, rotor retainer, and the rotary seal seat mounted in the rear of the rotor using L-cup
Straight-through, horizontal or vertical porting
Universal mounting design allows pump mounting with ports in vertical or horizontal plane
Protected front oil seals, prevents ingress of water from pressure washers
Reliability, Maximizing Your Uptime
Robust, 316 stainless steel construction
Double tapered roller bearings
Heavy duty cast iron gear case
Full range of threaded and flanged connections, welded and polished internally
Durable, powder coated or epoxy finish
Bi-directional pumping capabilities
Non-contacting rotors handle non-lubricating and lubricating liquids
316 Stainless steel eliminates corrosion
Fully swept pump chamber
Optional multi-lobe rotor available
Forgiving of Operator Error
ATEX/OSHA compliant seal guard
Infinite run-dry capability with seal flush
Non-contacting rotors eliminate galling
Optional pressure relief valve available
Modular pump design promotes easy disassembly for cleaning
Leave in place eliminates alignment
Clean and crevice free head
Front and rear O-ring seals on rotor spline area
Stainless steel bolt-on feet for vertical or horizontal mounting
ATEX compliant oil filler/breather cap
Pictures may be manufacturer's pictures and the product you receive may not be exactly as displayed, but it will be as described.
