EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > East Chicago
> Heavy Machinery
> Electrical
> AC Single Phase
> 240v
> Plasti-kote super enamel (royal blue): item# t-16
Plasti-kote super enamel (royal blue): item# t-16
Plasti-Kote Super Enamel (Royal Blue): Item# T-16
* A long-lasting, non-fading exterior/interior general purpose coating.
* Metal/Iron/Steel (use Plasti-Kote non-sanding Super Primer (T-18, T-19, T-25, or T-38) over bare metals
* Wood (use Plasti-Kote Automotive Sanding Primer T-234 - T-237 over bare wood)
* Aluminum (prime first with #470 Etching Primer)
* Paint on a clean, dry surface.
* Paint when the temperature is between 60 F - 80 F (16 C - 27 C) with relative humidity of no more than 60%.
* Practice on a discardable object.
* Seal all non painted surfaces with the recommended primer.
* Use 1-2 light coats when applied over the recommended primer, 2-3 light coats if primer is not used.
* Allow paint to dry 10 minutes between coats. Recoat within 4 hours or after 36 hours, otherwise paint may wrinkle or lift. Dry to touch in 40 minutes.
