EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > East Chicago
> Heavy Machinery
> Components
> Loftness 61" carbide cutter G2 skid steer mulching head
Loftness 61" carbide cutter G2 skid steer mulching head
Loftness 61" Forestry Mulching Head for Skid Steer Loaders
Counter Teeth in Cutting Chamber.
Built-in Recutter Bar at Discharge.
Optional Bolt-in 2nd Shear Bar.
Welded Claw Hooks on Pusher Bar.
Redesigned Spiral Tooth Pattern.
Premium HARDOX Swedish Steel Housing.
Standard High-efficiency Gear-type Motor.
Dual Cross-over Relief Protection.
1700 rpm - 17 inch Diameter Rotor.
On Board PSI Gauge to Monitor Capacity.
Skid Shoes - Adjustable 1 to 3 inches.
Hoses & Hose Holder are included.
Hydraulic couplers are not included.
The special body shape and hitch angle provide all the benefits of a moving door, without the hassle.
No need to add auxiliary valve and controls on skid-steer
Special body shape and hitch angle allow the cutter to be rolled back enough to expose knives to cut through the tree.
Rear of cutter can be lowered to contact the trunk to control cutting depth and to help prevent logs from being ejected to the rear.
Special body shape and hitch angle allow the rear of cutter to be lowered close to ground level, trapping material in the cutting chamber to be processed between the teeth and the shear bar.
By tilting forward as you back up, the downed material is pulled up against the counter teeth or optional shear bar for more efficient cutting and finer particle size. The built-in recutter bar assures that material is further reduced and directed toward the ground.
Designed for skid steer loaders with high flow hydraulics and a minnimum of 48 hydraulic horsepower.
This machine is new, has never been retailed and will be sold with new factory warranty.
