EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > East Chicago
> Heavy Machinery
> 100 pop rivets 1/8 countersunk steel safety wire gromet
100 pop rivets 1/8 countersunk steel safety wire gromet
Here is a chance to add 100 unique rivets to your hardawre collection. these are not available in hardware stores or at aircraft supply your getting 100 POP Brand 1/8 inch countersunk rivets.
They are so short they make an excellent grommet for safety wiring sheet metal or joining two very thin sheets with little hanging out . Take a close look at the photo below in the lower right corner of the razor blade you can see how the head of the mandrel pops out of the rivet leaving a countersunk Grommet. Great to add strength to a phenolic or composite panel you might want to wire.
A steel 1/8 inch diameter countersunk that weigh less than the aluminum,
They measure out as a 1/8 inch pop rivet and are the lightest rivet you can use. the weigh less then 0.2 Grams each even though they are steel. they are very light ! 5 of them poped had a total weight of .9 grams on my 1200.00 sotorius digital scale.
bothe parts of the mandrel seperate from the rivet leaving a open hole about 1/16 th inch ID
LABELED 3X2.8 3.3mm width , 1.83mm mandrel , 2.4 mm thickness ( 1/10th inch thick if you countersink)
ZN Plated Carbon Steel rivet with steel mandrel
1/8 inch diameter ( diameter for 2.4mm thickness)
Have you ever had the need for a flush mount pop rivet that looked nice and clean with a flush counter sunk mount and didn't have a lot of crushed flange hanging on the back side.
They were made in England by the POP corporation ( Emhart Teknologies ) and have a label pasted over their spec sheet by Tucker Fasteners.
They Mushroom Beautifully with the head shooting off and the pin pulling out leaving a extreamly light and flush rivet.
And the great thing is they work well with an ordinary 1/8 inch pop rivet gun
Great for RC Cars , Electronic Circuit Boards, Race Cars, General Fabritcation and Manufacturing where you don't want a sloppy look.
Just Like you I am working hard to support my family
The bottom line is the total cost to you and whether I can justify the time spent for the shrinking margin of profit from annual Rate, Monthly Service Fee Listing Fee and Commission increases.
Thank you for your consideration and hopefully your business
