EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Dolton IL
> Self Propelled
> Foudation Brakes
> Alto-shaam 500-2DN electronic controls 120V
Alto-shaam 500-2DN electronic controls 120V
Stack units without additional hardware
Individual or stacked units can be mounted on:
3" (76mm) casters and Caster Stand Assembly
5" (127mm) casters and Caster Stand Assembly
HALO HEAT . . . a controlled, uniform heat source that gently
surrounds foods for better appearance, taste, and longer holding life.
Product moisture is retained without adding water.
Holding temperature gauge monitors inside air temperature.
Dual wattage control on the one and two drawer 120V cabinets for more
precise control of hard-to-hold products.
500 watts for breads, rolls, biscuits
1000 watts for meat, potatoes, and vegetables
Extra large pans for additional capacity, or can be adapted to accept
Canted thermostat knob and indicator light.
Protects controls from damage
ON/OFF adjustable thermostat.
Can be built into cabinets or counters. Built-in trim kits
Exterior of 20 gauge non-magnetic stainless steel with one set of removable 16 gauge stainless steel drawer rail supports per
drawer. Each cabinet is controlled by one (1) ON/OFF adjustable thermostat with a range of 60 to 200 F (16 to 93 C) and
includes one (1) holding temperature gauge to monitor inside air temperature. Each drawer includes one (1) 12" x 20" x 6"
(305mm x 508mm x 152mm) stainless steel pan. The drawer assembly is easily adapted to accept an oversized pan that is 15" x
20" x 5" (381mm x 508mm x 127mm) for greater capacity. Drawer warmers are designed with four (4) stacking projections,
located on the top of each cabinet, to allow stacking in any combination without the need of additional hardware. Individual
drawer warmers, or stacked combinations, can be mounted on 3" (76mm) or 5" (127mm) casters and Caster Stand Assembly for
mobility, or a 6" (152mm) Leg Stand Assembly for stationary placement.
MODEL 500-1D: one drawer warmer
MODEL 500-2D: two drawer warmer
MODEL 500-3D: three drawer warmer
Solid state electronic control option simplifies temperature setting, has
a clear, easy-to-read LED display, and is adjustable in increments of 1 degree.
11-3/4" x 24-3/8" x 24-5/8" (298mm x 618mm x 625mm)
19" x 24-3/8" x 24-5/8" (482mm x 618mm x 625mm)
26-1/8" x 24-3/8" x 24-5/8" (663mm x 618mm x 625mm)
12" x 20" x 6" (305mm x 508mm x 152mm) GN 1/1
BAKED POTATOES, 50 DINNER ROLLS)
Minimum: 3-inches (76mm) at the back, 2-inches (51mm) at the
top, and 1-inch (25mm) at both sides. On-site venting for proper
airflow must also be provided for
built-in counter installations.
Drawer warmer must be installed level, and must not be
installed in any area where it may be affected by steam, grease,
dripping water, high temperatures, or any other severely adverse
80 lb (36 kg) 115 lb (52 kg) 150 lb (68 kg)
90 lb (41 kg) 125 lb (57 kg) 165 lb (75 kg)
X 27" X 30" 23" X 27" X 30" 30" X 27" X 30"
(406mm x 686mm x 762mm) (584mm x 686mm x 762mm) (762mm x 686mm x 762mm)
500-2D for BU2-48, BU2-72 55532
Caster Stand Assembly w/ 5" (127mm) casters 15379
Caster Stand Assembly w/ 3" (76mm) casters 5010920
Drawer Assembly with vents 55536
Pan, oversize, 15" x 20" x 5" (381mm x 508mm x 127mm) PN-2123
Perforated pan grid, 15" x 20" (381mm x 508mm) 1231
Perforated pan grid, 12" x 20" (305mm x 508mm) 16642
HI-LO Switch available only on 500 -1D and 500 -2D.
