EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Dolton IL
> Self Propelled
> Foudation Brakes
> 100MHZ oscilloscope scope probe for tektronix and hp
100MHZ oscilloscope scope probe for tektronix and hp
*Use it in your lab testbench at work, spare one at home for your product invention and designs, or bring it with you to school so you don't worry about reading deviation caused by different probes from stockroom. *Professional quality yet economical.
*Brand name equipment makers OEM it so you can imagine how reliable and quality this probe has.
*Guarantee maximum of 100MHz bandwidth at X10 position.
*Safety concern: IEC-61010CATII approved.
*Voltage limit: 600V(DC+peak AC) Decreases as frequency increases. For electronics use, you don't need to worry about this high voltage upper limit at all.
*Complete probe set in a clear vinyl bag with specification sheet.
This Passive high impedance oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1M Ohm shunted by 20pF.
However, it may be compensated for use with instruments have an input capacitance of 10-50pF.
Low-frequency compensation adjustment Low frequency response can be matched to the oscilloscope by adjusting the compensation trimmer on the head of the probe. Connect the probe to the oscilloscope and to a 1KHz square waveform source.
For X1/X10 probes, switch to the X10 position. Set the oscilloscope to display two to three cycles horizontal and two to six vertical divisions. Carefully adjust the trimmer adjuster screw to obtain the flattest tops to the square waves displayed on the scope.
