EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Dolton IL
> Heavy Machinery
> Electrical
> High Frequency Converters
> Stak-a-file - contains 2 files - granite
Stak-a-file - contains 2 files - granite
Stak-A-File - Contains 2 files:
Space saving vertical files for home, school, and office. Keeps files, magazines, and mail accessible. Organizes any work area. Mounts to walls, file cabinets, desks, doors, or any vertical surface. Expands by adding pockets. Made in USA by Newell Office Products Company. This listing is for 1 box of 2 files.
Screws and double sided tape for mounting
Complete instructions for mounting on bottom of box.
1. Determine that adequate space for mounting is available by positioning files in desired location.
2. Using slots located on the upper back area of file, mark screw location for bottom file. center of screw locations must me 12-3/8" apart horizontally.
3. Screws must be driven in straight leaving approximately 1/8" between underside of screw head and mounting surface.
4. For second and subsequent files to be added, measure 3-3/4" vertically from the first files mounting screw location. Screws must be 12-3/8" apart horizontally.
5. Hang bottom file by aligning slots in file with screws. Guide file over crew heads and slide downward locking file into place. Hang each additional file above the previous file in same manner.
TO MOUNT FILES WITH DOUBLE SIDED TAPE:
2. Mark location of bottom file lightly using a pencil.
3. Remove backing from one side of tape strip, place one strip of tape on each flat area below slots on back side of file. Place two strips on flat area located along the bottom of the back side of file.
4. Remove backing from other side of tape. Position file aligned with the location marked created in step 2. Press firmly into place.
5. For second and subsequent files repeat step 3, and remove remaining backing from strip of tape, slide file into proper location partially inside the previous file. Once in postion, press firmly.
