EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Dolton IL
> Heavy Machinery
> Electrical
> AC Three Phase
> High Voltage
> New prince hydraulic compensated flow control rd-1950-8
New prince hydraulic compensated flow control rd-1950-8
New Prince Manufacturing Pressure Compensated Adjustable Flow Control valve #RD-1950-8 with side port configuartion. 1/2"NPT ports. 0-8GPM flow range. 3000psi max
The PRINCE valve models RD-100 and RD-1900 are pressure compensated adjustable flow control valves. By rotating the handle, the low out the CF , or controlled flow port, can be varied from approximately 0 to the maximum controlled flow shown in the chart below. Any remaining flow is bypassed to the EF or excess flow port. This flow can be used to power another circuit or can be returned to tank. Once the controlled flow is set it will remain nearly constant with variations in pressure on either the controlled or excess flow ports.
Please note: If during operation the controlled flow port is blocked the valve will compensate in such a way as to shut off flow to the excess port.
These valves can also be used as a restrictive flow control by plugging the excess flow port but steps should be taken to monitor heat.
