EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Dolton IL
> Heavy Machinery
> Electrical
> AC Three Phase
> High Voltage
> Belden AX101046 PS5 giga flex jack mdvo style cat.5E
Belden AX101046 PS5 giga flex jack mdvo style cat.5E
The GigaFlex PS5E Module is a new punch down UTP connector within the Modular Connectivity product line. The GigaFlex PS5E Module is based on a patent-pending Encapsulated Lead Frame technology ensuring excellent long term reliability as well as extremely stable transmission performance. The unique in-line IDC termination interface allows quick and easy installation using GigaFlex, BIX, 110 or Krone connecting tools. The GigaFlex PS5E is the module of choice for terminating UTP cables into the MediaFlex and Interface Outlet Series. It can also be mixed and matched with a wide variety of MDVO adapters, boxes and patch panels to suit practically any installation configuration for workstation outlet, consolidation point and telecommunications room applications. The PS5E-rated performance exceeds all requirements specified in the TIA/EIA-568-A Category 5e Addendum. All performance parameters including NEXT, FEXT, attenuation and return loss have been set to guarantee transmission performance up to 160 MHz. The GigaFlex PS5E is designed to be used with the IBDN Plus Cabling System and the IBDN System 1200.
Usable bandwidth of 160 MHz guarantees headroom of Category 5e standard
Data rate of 1.2 Gb/s offers excellent price/performance ratio for gigabit applications
Patent-pending Encapsulated Lead Frame technology provides long term reliability and stability
Unique universal IDC termination interface - using GigaFlex, BIX, 110 or Krone tools
In-line IDC termination interface with sharp pair splitters facilitates installation in various mounting accessories
Easy-to-read 568A/B color scheme prevents termination errors
Clear protective cap strain relieves terminated pairs while allowing inspection and wire management
Colored modules facilitates service identification and eases network management
Mix and match flexibility with MDVO adapters, boxes and patch panels allows the same connector to be used in all applications throughout the channel.
Multi-user telecommunications outlets
Gas-tight connection - insulation slicing of 22 to 24 AWG (0.64 to 0.51 mm) plastic insulated solid copper conductors
Durability: 10 insertions of any combination of wire gauge.
8-pin connector, FCC part 68, Subpart F and IEC-603-7 compliant 8-pin connector compatible with 6-pin plugs
Durability: 1000 mating cycles.
Dimensions: With the protective cap: 20.8 x 19.7 x 34.7 mm
Module snap-in: fire-retardant plastic, UL94V-0, gray, almond, white, black, orange, red, yellow, green, blue, purple or brown
IDC housing: fire-retardant plastic, UL94V-0, almond
Protective cap: fire-retardant plastic, UL94V-0, clear.
IDC clip material: copper alloy with nickel plating
Encapsulated clips, in fire-retardant, UL94V-0, plastic support, black.
Contact material: copper alloy with 50 micro-inches gold over nickel.
Designed to exceed the Category 5e standard
Minimum average values measured at 100 MHz with PS5E plugs:
Dielectric strength: 1,000 V RMS at 60 Hz for 1 minute
Current rating: 1.5 A maximum
Insulation resistance: 200 M minimum
Contact resistance: 1 m per cont
Use the GigaFlex Termination Station (AX101172) for better support during termination process
Follow the color-coding sequence printed on the back of the module to position twisted pairs prior to termination
Use the cable jacket to protect the twisted pairs during termination
Use either GigaFlex, BIX, 110 or Krone connecting tools to terminate the module
Snap protective cap onto the back of the module to strain relieve the conductors after termination
Installation Guide is supplied with each box of 50 modules and is available in the "Document Center" of NORDX/CDT's Web Site.
Use the Outlet release tool or a standard screwdriver to disassemble the module from its mounting hardware or to remove the protective cap for re-termination.
