EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Dolton IL
> Heavy Machinery
> Electrical
> AC Three Phase
> 480v
> 6' magnetic transducer / magnetic probe / coil inductor
6' magnetic transducer / magnetic probe / coil inductor
6' MAGNETIC TRANSDUCER / MAGNETIC PROBE /
MAGNETIC ELECTRODE / MAGNETIC PICKUP COILS
New. These magnetic transducers / magnetic probes / magnetic electrodes / magnetic pick-up coils can be used for both detecting/receiving and transmitting magnetic fields and as a small electromagnets, depending upon the piece of equipment it is connected to (under 100ma current). Originally bought for brainwave research, these transducers can be used for many applications, including but not limited to, brainwave detection, other psychic and paranormal research, other medical/biomedical research, small magnetic field detection, small metal detection, bug detection/tap detection (as well as bugging and tapping), some implant detection, isolated communications, material flaw detection, magnetic therapies, etc.
Cable length is 6-foot and is of a very high quality and pliable coaxial cable (coaxial cabling is required to absolutely minimize electrical noise pick-up). The transducer is about 3/16" diameter and about 1/4" long - an amazing 8.2mh for its tiny size. On the other end is connected a mini-phone plug (we also have a few each with RCA plug, sub-mini phone plug and spade lugs, so if you need one of these, let us know). This transducer will both receive and transmit magnetic energy from about 0.3 Hz to about 300 KHz pulse, modulated and sinewave signals - covering the entire audio frequency bandwidth (BW), as well as most of the infrasonic BW and effective-in-air ultrasonic BW.
For use with living tissues (plant or animal), penetration or even direct contact to surface is not required, however, contact should be as close to surface as possible as air gaps diminish effectiveness. This means that it is totally non-invasive and one does not have to use gel, shave the area, touch the skin or other surface, or suffer electrode irritation (common to skin contact and invasive electrodes) to effectively use it, and it can be used over light clothing. As with all transducers, especially those used for sensitive detection purposes, the transducer should be held as steadily as possible. This can be done using a steady hand, rubber bands, velcro or shower cap with a hole in it to pass the cable or tape (none of these are provided). For permanent use and non-living area contact, you might also consider using a cement, glue or other firm adhesive to attach the transducer rock-solid to the surface.
This special transducer is not intended for any medical uses. We are not licensed medical professionals. We make no medical or paranormal (including but not limited to psychic powers) claims. This transducer can also be used for many general electronic laboratory, shop, automotive and hobby / craft uses.
LONE STAR CONSULTING, INC. of El Paso, Texas welcomes you. Thank you very much for considering Customized Devices we make and Off-The-Shelf Items made by others
Custom-Made / Made-to Order / Off-The-Shelf Unique, Unusual, Useful, Profitable, Controversial, Special Needs High-Tech Hardware / High-Tech Services Lone Star Consulting, Inc. Sells
All applicable Lone Star Consulting, Inc. policies are on its corporate website. For all questions and comments, please email us (Lone Star Consulting, Inc., El Paso, TX). Thanks and best of successes - John J. Williams, M.S.E.E.
