EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Merrillville
> Advance tabco regaline sink 3 comp 24IN l-r dbs
Advance tabco regaline sink 3 comp 24IN l-r dbs
Advance Tabco Regaline Sink 3 Comp 24in L-R DBs |93-3-54-24RL
Regaline Sink W/3 Compartment 16''W x 20''L Bowl Size. R/L-Hand Drainboard (930 Series)
Tile edge for ease of installation.
12'' Deep, with 8'' high splash
One piece Deep Drawn sink bowls with splash.
Featuring the single bowl unit design.
All sink bowls have a large liberal 3 radius.
Placement of the welded leg assembly ensures stability and furnishes direct support of the column load requirement for the entire sink unit.
16 gauge type 304 Stainless Steel
24'' Right/Left-Hand Drainboard
Welded areas blended to match adjacent surfaces and to a satin finish.
Gussets welded to a die-embossed reinforcing channel.
ADV-93-3-54-24RL|93-3-54-24RL|009-9335424RL
Regaline Sink, Three 16''W x 20''L Compartment, With R/L-hand Drainboard, 12'' Deep, 8'' Splash, S/S Open Frame Base, side crossrails, 24'' R/L-Drainboard
Pre-Rinse Slide Bar - 16in x 20in
Prerinse Slide Bar, for 16" x 20" prerinse sink (ADT-DTA65)
PRERINSE BASKET 16X20 W/ SLIDE BAR
Basket, welded slide rail for 16" x 20" pre-rinse sink (ADT-DTA69)
Drain - Lever Operated with Built In Overflow - 2"" IPS
Drain - Lever Operated with Built In Overflow - 2" IPS (ADT-K15)
Sink Cover - Poly-Vance - 16in x 20in
Sink Cover - Poly-Vance - 16'' x 20'' (ADT-K2C)
Wall Bracket, for faucet (ADT-K30)
Continuous Waste for 3 Compartment Sinks
Continuous Waste for 3 Compartment Sinks (ADT-K351)
Support Bracket for Lever Drains
Support Bracket, for lever drains on sinks (ADT-K4)
SPEC-LINE Lever Drain All Stainless Steel
SPEC-LINE Lever Drain All Stainless Steel (ADT-K40)
Stainless Steel Sink Cover - 16in x 20in
16" x 20", stainless steel (ADT-K455C)
Install Collar w/ Control Bracket
Install collar, with 6" x 9" control bracket (ADT-K461)
Sink bowl depth modification (14" maximum - specify depth required), per bowl (ADT-K470)
Faucet hole revision, each (ADT-K472)
Provision for Pot Washer, (for a "Kewanee" only), each (ADT-K489)
Provision for Pot Washer - PW-106
Provision for Pot Washer, (for a "Wells PW-106" only), each (ADT-K490)
Provision for Hatco Heater, each
Provision for Hatco Heater, each (ADT-K491)
Twist Operated Drain - 2in IPS
Drain, twist operated, 2" IPS (ADT-K5)
Apron, to cover sink bowls, stainless steel, (per sink) (ADT-K500)
Anti-Siphon Vacuum Breaker Holes
Anti-Siphon Vacuum Breaker Holes (ADT-K37)
Waste Trough w/ Removable Basket
Waste trough, furnished with a 2" deep removable basket (ADT-K440)
High Backsplash up to 18'' (per linear. ft.)
High Backsplash up to 18'' (per linear. ft.) (ADT-K447)
High backsplash, up to 13", (per linear. ft.) (ADT-K448)
Advance Tabco Extra Drainboard |K-450
Extra Drainboard, (per linear. ft.) (ADT-K450)
Drainboard Corner Turn, each (ADT-K451)
Drainboard/Sink Sidesplash, each (ADT-K454)
Scrap Block, installed (ADT-K456)
Disposal Cone w/ Control Bracket & Faucet Holes
Installation, disposal cone with 6" x 9" control bracket and faucet holes, each (ADT-K460)
Turn down backsplash (ADT-K495)
Prepare sink for undercounter dishwasher
Prepare sink for undercounter dishwasher. (24" drainboard or larger), (per sink) (ADT-K510)
HI-LITE Mirror Edge for Sinks - Upgrade (ADT-K106)
Welded set-up & shell crated, per sink
Welded set-up & shell crated, per sink (ADT-K23)
Advance Tabco Shell Crating |K-24
Working height revision, (per sink)
Working height revision, (per sink) (ADT-K473)
Stainless Steel Leg w/ Metal Bullet - 300 Series
300 Series Leg, stainless steel, with metal bullet feet (ADT-K474)
Stainless Steel Legs w/ Metal Bullet Feet
Legs, stainless steel, with metal bullet feet, each (ADT-K475)
Punch for overflow holes (each), please specify make & model of overflow used (required for overflows unless using K-15) (ADT-K476)
Bullet Feet, stainless steel, each (ADT-K478)
Undershelf, stainless steel, (per linear. ft.) (ADT-K479)
Flanged Bullet Foot, price per each (ADT-K488)
Stainless Steel Leg w/ Metal Bullet Feet - 300 Series
300 Series Leg, stainless steel, welded, assembly with metal bullet feet (ADT-K493)
Advance Tabco Tubular Rack Storage |K-550
Tubular rack storage, s/s, under drainboards (per linear. ft.) (ADT-K550)
Welded field joint (welded in field by others)
Welded field joint (welded in field by others) (ADT-K57)
Splash cutout for pipe chase (chase by others)
Splash cutout for pipe chase (chase by others) (ADT-K77)
