EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Light Machinery
> Norgren miniature 1/8" brass regulator 149ER02
Norgren miniature 1/8" brass regulator 149ER02
MAINLAND VALVE & FITTING, INC IS A SURPLUS INDUSTRIAL WHOLESALE SUPPLY COMPANY. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE. WHAT THAT MEANS FOR YOU IS, YOU WILL RECEIVE A HIGH QUALITY LONG LASTING PRODUCT AT A SUBSTANTIAL SAVINGS.
NORGREN MINIATURE BRASS BODY REGULATOR
Miniature Brass Body Regulator
Water and Compressed Air Service
1/8" FNPT GAUGE PORT CONNECTIONS (GAUGE NOT INCLUDED)
OUTLET PRESSURE: 5 to 50 psig (0.3 to 3.5 bar)*
*Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges.
MAXIMUM PRESSURE: 400 PSIG (27 bar)
Compact design, corrosion resistant construction.
Brass body with plastic bonnet.
Plastic bonnet equipped with low torque, non-rising pressure adjusting knob.
Snap action knob locks pressure setting when pushed in.
Non-relieving models for air and water service.
Can be disassembled without the use of tools or removal from the air or water line.
Fluid:Water and compressed air
Maximum pressure: 400 psig (27 bar)
Water service: 35 to 150 F (2 to 65 C)
Air service: -30 to 150 F (-34 to 65 C) *
* Air supply must be dry enough to avoid ice formation at temperatures below 35 F (2 C).
Typical flow for water service at 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set pressure and a droop of 15 psig (1 bar) from set: 1.3 gpm (4.9 lpm)
Typical flow for compressed air service at 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a droop of 15 psig (1 bar) from set: 12 scfm (5.7 dm
Models with plastic bonnet: 1.19
(These products are represented as NEW SURPLUS)
