EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Light Machinery
> Hydraulics
> Lightolier recessed 1000LV
Lightolier recessed 1000LV
Medium LV New Construction Housing
Manufacturer: Lightolier Lighting
Lightolier Lights 1000 series low voltage 120-volt new contruction rough in housing with magnetic transformer and thermal protector for use in non-insulated ceilings, insulation may not be placed above or within 3" from the sides of the fixture. Its features include:
* 5" Aperture Incandescent Frame-In kit
* Mounting Frame: .036" galvanized steel. Accommodates all ceilings up to 1" thick; including existing and inaccessible areas. Breakout section and anchor nails permits installation in existing ceilngs from below. Push-in/twist-out rotoclips hold reflector flush to ceiling.
* Junction box: 4"x3"1/2x2", .063" galvanized steel. U.L. listed for maximum of 8 No. 12 ga. 90 degree Celcius through branch circuit conductors. Integral cable clamps permit attachment of nonmetallic Romex or armored cable without need of additional connectors.
* Mounting bars: .059" galvanized steel. 13" long bars extend to 27" with integral nailing tabs. Attaches to wood joist without need of accessories.
* Socket Housing: .036" galvanized steel.
* Socket: field replaceable. Two pin socket, pre-wired with #18 SF1 leads to junction box.
* Thermal protector: meets NEC and UL requirements. Insulation must be kept 3" away from fixture sides and wiring compartments and must not be placed above fixture in a manner which entrap heat
* Transformer: outboard mounted, magnetic, 120Volt primary, nomimal 12Volt secondary. Removable from below.
