EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Icom ic-A200 aircraft radio ICA200 a-200 ic-A200
Icom ic-A200 aircraft radio ICA200 a-200 ic-A200
For obvious reasons I will accept no returns. Radio will not be DOA and will work as it is supposed to. I have listed some information from the ICOM website below.
ICOM's high quality 760 channel VHF communications transceiver, the IC-A200, gives you a strong 7 Watts of output power and offers the best blend of features, value and dependability. - Easy-to-see function display: All important information is provided in extra-large characters for easy viewing, day or night. Effective viewing angle increases side visibility making the IC-A200 easier to read. At all times, the USE and STBY (standby) window frequencies simultaneously appear on a large function display. - Illuminated switches and function display - Switches and the function display are illuminated for night flying. Illumination dims and brightens in synchronicity with the aircraft panel. - Simple to operate. The automatic squelch function eliminates the need to make inconvenient squelch adjustments. All required functions are activated with a minimum number of switches and controls. - 2 ways to select the desired frequency. - Direct frequency selection: A desired frequency can be selected in the USE window directly. - Indirect frequency selection. - Allows you to select a desired frequency in the STBY window. Pushing the switch exchanges the USE window frequency for the STBY window frequency. - Remote Control Capability: Memory channel selection and exchanging of the USE and STBY window frequencies can also be accomplished with remote switches. Hence, you can place these switches in the most convenient place. 3 kinds of tuning steps - The transceiver has 2 concentric tuning knobs. The small tuning knob provides 50 kHz tuning steps. When the small tuning knob is pulled out, 25 kHz tuning steps are selected. The large tuning knob offers 1 MHz tuning steps. These features cut down on the time and trouble it takes to tune your transceiver to desired frequency. - Full frequency coverage:The advanced IC-A200 covers 118.000~136.975 MHz continuously in 25 kHz tuning steps. A total of 760 communications channels are available. - 9 memory channels: For storing ATIS, ground control, tower, company radio, and many other required frequencies, 9 memory channels are included. - Memory protection capability: Once you've chosen the frequencies you want to reside in the IC-A200, you need not worry about losing them. - Durable construction & stable output power. The dependable die-cast body ensures ample heat dissipation and a stable 7 W of RF output power. In short, it's made to last in an environment of abrupt temperature variations. - Intercom Functions: With additional wiring aboard the aircraft, the intercom function allows you to talk with your crew. - Compact body for easy installation: Measuring just 6.3(W) x 1.3(H) x 10.7(D) in. The IC-A200 neatly fits the mounting brackets used on most aircraft. Required connectors are also included
* Frequency Coverage: 118-136.975 MHz * Mode: AM (6K00AE3)
* Number of memory channels: 9 * Tuning steps: 25 kHz, 50 kHz or 1 MHz
* Power supply requirement: 13.8 V DC 15% (negative ground) * Current drain (at 13.8 V DC):
Tx: 2.6 A - Rx (max. audio): 600 mA; Rx (squelched): 320 mA * Useable Temperature Range: -20 C to +55 C
* Frequency stability: 15% (-20 C to +55 C) * Dimensions (projections not included): 160(W) x 34(H) x 271(D) mm; 6.3(W) x 1.3(H) x 10.7(D) in * Weight: 1.1 kg; 2.4 lb
* Output power: 7 W (carrier power) * Microphone impedance: 600 ohms
RECEIVER * Receive : Double-conversion superheterodyne * Intermediate frequencies: 1st 32.455 MHz; 2nd 455 kHz
* Sensitivity (for 6 dB S/N): 2.0 V (with 1 kHz, 30% modulation) * Spurious rejection: -80 dB
* Audio output power: 5 W with a 4 ohm load; 100 mW with a 500 ohm load
