EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Heavy Machinery
> Parts
> Readywelder ii ready welder battery powered mig welder
Readywelder ii ready welder battery powered mig welder
ReadyWelder II Ready Welder Battery Powered Mig Welder
Limited Supply Get'em While They Last!!
Ready Welder is a compact battery powered MIG welder. It operates on two or three 12 volt DC batteries in series, producing 200 to 350 Amps of power for deep penetration of metals. For thinner metals a 12 and a 6 volt battery connected in series to produce 18 DC volts and lower Amps works just fine. The use of a single 12 volt battery is not normally recommended..
The Professionals who use it, report that the Ready Welder is a high yielding asset in their welding trade, because of it's lower initial cost plus it's lower operating costs. A smaller truck can be used to go out for field repairs with the Ready Welder. The setup time and electrical usage costs are less than before they began using this Product.
The Ready Welder can also be used as a Spool Gun, by connecting it to a Stick Welder or a conventional MIG machine. It operates from 115 AC volts while plugged into any welding device which might require a Spool Gun, for example, as when welding aluminum.
Model #10000MVP-CS, known as the "Maintenance Vehicle Pack", is specially designed for Maintenance Trucks or the Mobile Repair Vehicle. Every maintenance truck should carry one. Call for pricing.
* PORTABILITY: The Ready Welder, in it's case, is light enough to be hand carried and includes everything to start welding! You supply (2) 12V automotive style batteries...thats it!
* AMPERAGE RANGE: The Ready Welder welds very thin metals using a 12 and a 6 volt battery, (18 volts) or very thick metals with 36 volts DC, (three 12 volt batteries) yielding from 45amps, up to 350 amps of power.
* VERSATILE: Welds steel, stainless steel, aluminum, or any weld-able metal or alloy; in addition: Use it as a Spool Gun or as a stand alone welder. Ready Welder II welds with, or without a gas tank, as with flux core electrode wire.
* ECONOMY: User friendly, quick setup time, economical to use, low purchase cost, are among the factors making it a "must have" for every tool box.
* UNIQUENESS: The Copyrighted design and Patented Circuitry make it a unique product which fills a previously unmet need, worldwide.
* SAFETY FACTOR: After a history of nearly 10 years of operation, the Ready Welder Corporation has had no report or claim of any injury from use of the Ready Welder.
Ready Welder II REALLY works!, July 2, 2008
"Although I had never used a MIG welder, I purchased a Ready Welder II and taught myself to use it! After only eight (8) 1" welds, I felt confident enough to construct a 20' aluminum awning frame and sold the awning for more than $1,200! I normally weld .068 to .125 aluminum tubing using either 18 or 24 VDC. I have also welded up to 1/2" steel plate using flux cored wire and 36 VDC! Stainless Steel is my next project! The brochures say that it will weld up to 1" using 40 volts! Except for the batteries and gas (if needed), I can carry the welder anywhere with one hand. I am very impressed with this welder, and recommend this product to all welders, from the novice (like me!) to the pro!"
This Listing is for Model #10000
The ground cable is attached to the red dual quick disconnect connectors. This makes welding jobs in remote locations easy, portable and quick. This model will run off any 18, 24 & 36 volt batteries in a parallel series depending on the application and material to be welded. The Model #10000 has a one year 100% parts and labor limited factory warranty.
* Welds Steel, Stainless and Aluminum or Any Metals Where Standard One or Two Pound Spools are Available
18 Volts can do Thin Sheet Metal
24 Volts will Single Pass 1/2" @ 275 amp
36 Volts will Weld up to 3/4" @ 350 to 400 amp
* Connects to MIG/Constant Voltage Output Welders
* Uses Wire Sizes from .023 to .040 without changing rollers.
* Uses Heavy-Duty TWECO Quality Front End Consumables
* Wire Speeds of 50 Inches to 900 Inches per Minute
* Ten Foot Cable with Quick Disconnects, Can be
* One Spool of Flux Core Wire
* Extra Tips and Gas Hose Fitting
* Ten Extra Feet of Gas Hose
* Foam Lined Blow-Molded Tough Briefcase
