EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Heavy Machinery
> Parts
> Pulnix takex photo beam sensor # pb-in-100HF ** **
Pulnix takex photo beam sensor # pb-in-100HF ** **
Takex PHOTOELECTRIC BEAM SENSOR
Intelligent "QUAD" Photoelectric Beam
Unit is NEW and in factory sealed box, never opened
Installation by security proffesional is highly recomended as incorrect wirring WILL damage unit
The TAKEX intelligent "QUAD" photoelectric beam is especially designed for outdoor protection.
Unique Quad beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The PB-IN-HF series beams are equipped with many features which provide a wide choice of field selectable options. These options result in considerable flexibility for a variety of application requirements
4 SYNCHRONIZED HIGH POWER INFRARED [PATENTED]
* 4 beams are "and-gated", which helps to prevent false alarms from falling leaves and small animals.
* The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
* External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.
4 separate choices of frequency avoids cross-talk in stacked or long linear installations.
BEAM TRANSMISSION STRENGTH SELECTION
2 levels of beam transmission strength which can be set to suit the protection distance.
* Audible signal for alignment [Utillty model]
An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level.
* Sensitivity attenuation LED
Lights when beam level is attenuated, which shows low sensitivity.
Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Aut-Gain lock is easily confirmed by sound check.
Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.
Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.
As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.
Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.
* Wide adjustment (horizontally +/-90 , vertically +/-10 )
* Polycarbonate cover excellent at antishock
Near infrared beam interruption system
(TR.-RE. 4 beams simultaneous interruption)
Double modulation pulsed beams by LED
50msec. to 700msec. variable (Standard : 50msec.)
70mA or less at protection (max. 105mA or less)
Reset : Interruption time + off-delay (approx. 1.5sec)
Contact capacity: 30V (AC/DC) 1A or less
Dry contact relay : 1a or 1b (selectable)
Contact operation : Output when weather condition gets worse
Contact operation : Output when receiver cover is detached
Red LED (receiver) lights when an alarm is intiated
Red LED (receiver) lights when beam reception is attenuated
Modulated beam frequancy selection, Tone indicator,
Environmental module,Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack.
Horizontal : +/-90 , Vertical : +/-10
