EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE   >   Hammond   >   Agricultural and Construiction   >   Plants   >   Gto pro SW2502 dual swing gate operator kit sw 2502

Gto pro SW2502 dual swing gate operator kit sw 2502


WE ARE AUTHORIZED GTO RESELLERS WHICH MEANS YOUR GTO PURCHASE IS BACKED BY A VALID GTO MANUFACTURERS WARRANTY.
The GTO/PRO 2502 DualOpener can be used with GTO Inc. s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more.
The GTO/PRO 2502 DualOpener is a low voltage system, eliminating the need to run 110 AC to your gate. Simply run 16-gauge low voltage to a household outlet within 1000 of the operator or use a solar panel. With the GTO/PRO 2502 s oversized control box you can house (2) 7 amp/hour batteries to accommodate higher opening cycle situations and extra storage for solar. (Second battery is not included).
The GTO/PRO 2502 Dual Opener can be used in residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be set on the left or right and is used in the standard pull-to-open operation. By adding the push-to-open bracket accessory (not i ncluded) the GTO/PRO 2502 can be used to push the gate open away from the property with the arms still mounted on the inside.
GTO Swing Gate Dual Operator Kit Model GTO PRO SW2502
arrow Soft Start/Soft Stop Soft start/soft stop is a feature in which the control board, during the set up process, learns where your opening and closing points are for the swing of the gate. Then during normal operation the gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. This feature can also be turned off.
arrow Closing Timer Set your gate to close between 0 and 120 seconds after reaching the full open position or turn this option off to leave it open until an entry device activates closing motion.
arrow Learn Mode With the GTO/PRO 2502 the learning process, the end points are determined by the user via remote. A simple press of the transmitter tells the opener where to stop and when the opener is set to the desired stop points, save the settings on the board.
Oversized Control Box Housing The GTO/PRO 2502 oversized boxes can house 2) 7 amp/hour batteries and is rated for outdoor use.
arrow IMPORTANT: Solid gates create wind resistance and can affect the performance of the entire gate system. Call technical service for the best advice for your application.
GTO-PRO products listed here and other pages are registered trademarks of GTO, Inc.
Please contact us if you are interested in any of the other GTO Swing (or Slide) Gate Operators including:
DC Swing Gate Operators: PRO-SW3000, PRO-SW3200, PRO-SW4000, PRO-SW4200, PRO-SW2500, PRO-SW2502, PR-SW2550
DC Slide Gate Operators: PRO-SL1000, PRO-SL1200, PRO-SL1000B, PRO-SL1200B, PRO-SL2000, PRO-SL2200, PRO-SL2000B, PRO-SL2200B
AC Swing Gate Operators: PRO-SW5000, PRO-SW6000
AC Slide Gate Operators: PRO-SL5000B, PRO-SL6000B
ALL GTO XL MODELS ARE NOW IN STOCK!!!!!



Gto pro SW2502 dual swing gate operator kit sw 2502