EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Hammond
> Agricultural and Construiction
> Animal Feed
> : hubbell 3P4W 60A 250V pin & sleeve receptacle
: hubbell 3P4W 60A 250V pin & sleeve receptacle
HBL460R9W - Pin and Sleeve Products
Watertight IEC Pin and Sleeve Receptacle,
Beryllium Copper multi-contact insert with silver plating.
UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC
600V RMS (i.e.minimum creepage distance 10 mm minimum)
Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.
Per CSA C22.2 No. 182.1 / UL1682.
Terminals identified in accordance with North American and IEC conventions.
Identification and ratings are a permanent part of the device housing.
HB or Better per UL 94 or CSA C22.2 No. 0.17
Maximum Continuous: 75 C; Minimum Continuous: -40 C w/o impact.
UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL 1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets and LR285C for Receptacle CSA Standard C22.2 No. 182.2, UL Classified to IEC 309-1 and
Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
Note: Image is for illustration purposes only. The connector in this listing is BLUE.
