EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Self Propelled
> Steering Components
> Metacut-M250 manual cut off machine
Metacut-M250 manual cut off machine
For Sale, Brand New Metacut-M250 Manual Cut Off Machine. The METACUT-M250 is a manual cut off machine, designed for wet cutting of large and small, regularly or irregularly shaped metallic, ceramic or composite materials. It has a cutting capacity of 90mm. The side access port permits the sectioning of extra-long workpieces. The machine is equipped with a powerful motor, driving the cut-off wheel towards the workpiece. The bottom part of the machine is a large robust alloy base casting.
The cutting table is provided with T slots increasing the versatility so that different clamping sets can be mounted. The quick clamping devices are removable to permit the installation of conventional clamping tools to hold down larger samples. The complete system is enclosed in a protective hood with a large shatter proof window to observe the cutting process. METACUT has the highest safety standards. The interlocking safety device does not allow the motor to be started unless the hood is closed.
The hood can not be opened before the motor is stopped. The electronic brake system brings the cutter to a quick, full stop in seconds. A closed loop recirculating cooling unit is standard. The cutting surface is cooled by spray nozzles on both the cutting wheel and specimen. Supplied with Two Vises A Value Of $1200. The Item Specifications are:
* Cutting Capacity: 90mm or 65mm x 130mm
* T-slotted table: 210mm x 210mm
