EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Self Propelled
> Door security beam with reflector,for shop,restaurant
Door security beam with reflector,for shop,restaurant
DOOR SECURITY BEAM WITH REFLECTOR
Designed for Use in Shops, Restaurants and Service centres, etc
* A send/receive unit - transmits an invisible beam of infrared light across the doorway onto a prismatic reflector mounted on the opposite side
* The beam is reflected back to the receiver to complete the 'seal'
* Produced by a highly reliable Light Emitting Diode (LED)
* When a person walks through the beam, the circuit is interrupted and this causes the alarm to sound an audible warning
* The warning buzzer can be mounted in any suitable location
* Retro-reflective photoelectric beam sensor
* No hard wiring required, all components plug in type
* LED indicator for power/beam alignment
* Working temperature: -20C~50C
* Voltage 240V mains through 9 volt adaptor
* Total current consumption: < 100mA
* Speaker: Chime/Off/Alarm (selectable by slide switch)
* Volume of speaker: Off ~ Max. (adjustable)
* Sound of speaker: "Ding-Dong" or siren sound when beam is broken
* Sounding time: 3 ~ 30 seconds (adjustable)
* Transmitter/Receiver size 117(H) x 45(W) x (78(D)mm
* Includes '+','-' and 'Reset' buttons
* Measures: 60(W) x 70(H) x 23mm(D)
Note: Counter and extra buzzer are available. Power adapter is 240v Australian standard, for use in Australia/NZ.
Want to know more about security products? Visit our GUIDE TO SECURITY PRODUCTS. Visit My Store for best bargains on other SECURITY PRODUCTS
