EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Gary Indiana
> Agricultural and Construiction
> Food
> Aircraft grey gray polyurethane paint mil-prf-85285D
Aircraft grey gray polyurethane paint mil-prf-85285D
TWO .75 GALLON CANS OF DEFT COATING PART A WITH TWO ONE QUART CANS OF COMPONENT B -ALIPHATIC ISOCYANATE RESIN MIX. MIL-PRF-85285D, TYPE I CLASS H COKLOR GREY.
PRODUCT INFORMATION DATA SHEET
17451 Von Karman Avenue, Irvine, CA 92614
Tel (***) 474-0400 (***) 544-3338
DESCRIPTION: The 03 Series are chemically cured, two-component polyurethane topcoats that are suitable for exterior application on aircraft and aerospace equipment. Component A contains the pigment and polyester resin. Component B is a clear, non-pigmented aliphatic isocyanate prepolymer, which acts as a hardener or curing agent for Component A. When the 03 Series polyurethane topcoats are used over MIL-PRF-23377 or MIL-PRF-85582 epoxy primers, they provide protection against weathering, humidity and salt spray. The cured films are resistant to jet fuels, lubricating oils and hydraulic fluids. The 03 Series polyurethane topcoats meet current standards for high / low temperature flexibility and impact resistance.
COLORS: This coating may be furnished in any color and gloss range as designated by the Federal Standard 595B. Custom colors are also available.
1 part base to 1 part catalyst (gloss)
3 parts base to 1 part catalyst (camouflage)
Mix ratio for semi-gloss varies and is based on base color
Average Theoretical Weight Per Gallon, Mixed
9.19-lbs/gal 0.77 (all gloss ranges)
Average Theoretical % Solids By Weight, Mixed
62.5% 1.0 (all gloss ranges)
Average Theoretical % Solids By Volume, Mixed
52.0% 2.0 (all gloss ranges)
Theoretical Coverage @ 1 mil Dry Film Thickness
831-sq.ft. 34 @ 100% transfer efficiency
*Characteristics are calculated based on product formula and raw material characteristics reported by raw material suppliers. Values are thought to be representative, but they are not to be treated as specifications.
** Use only if needed and if local and state VOC limits allow
Shelf life: 1 year when stored between 50 85 F in original, unopened containers away from direct sunlight.
Dry Times @75 5 F, 1.7 2.3 mils:
Dry to topcoat: Refer to MIL-PRF-23377 or MIL-PRF-85582 for re-coat times
May be forced dried. Refer to MIL-PRF-85285 specification or contact Deft Tech Support for more information
APPLICATION RECOMMENDATIONS: May be applied by Conventional, Airless, Air Assisted Airless, HVLP or Electrostatic spray equipment
CLEAN UP: IS-213 Polyurethane Reducer