EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > East Chicago
> Agricultural and Construiction
> Fertilizer Production and Distrobution
> MCP111-240E - ic supervisor circuit to-92 - lot of 10
MCP111-240E - ic supervisor circuit to-92 - lot of 10
Up for sale is a Lot of 10 - MCP111-240E TO-92 Micropower Voltage Detector.
The MCP111/112 are voltage-detecting devices designed to keep a microcontroller in reset until the system voltage has reached, and stabilized, at the appropriate level for reliable system operation. These devices also operate as protection from brown-out conditions when the system supply voltage drops
below a safe operating level. The MCP111 and MCP112 are available in eight different trip voltages.
The MCP111 has an open-drain output with an activelow pin (VOUT). This device will assert VOUT when the voltage on the VDD pin is below the trip-point voltage.
The MCP112 has a push-pull output and will assert an active-low signal (VOUT pin) when the voltage on the VDD pin is below the trip-point voltage.
During operation, the output (VOUT) remains at a logichigh as long as VDD is greater than the specified threshold voltage. When VDD falls below the voltage
trip point, VOUT is driven low.
Ultra-low supply current: 1.75 A (max.)
Precision monitoring options of:
- 1.90V, 2.32V, 2.63V, 2.90V, 2.93V, 3.08V,
Resets microcontroller in a power-loss event
- MCP111 active-low, open-drain
- MCP112 active-low, push-pull
Available in SOT23-3, TO-92 and SC70 packages
- Industrial: 40 C to +85 C (MCP1XX-195 only)
Critical C and P Power-monitoring Applications
Portable Battery-Powered Equipment
