EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE > Dolton IL
> Agricultural and Construiction
> 2007 baileigh rbd 250 tube bender w/ programmable contr
2007 baileigh rbd 250 tube bender w/ programmable contr
Please call Shaun or Joe at (***)-501-1084 with any questions or to make an offer.
2007 Baileigh RBD 250 Tube Bender w/ Programmable Control
Dimensions: 26" W x 33" L x 44" H
Mild Steel Pipe (Schedule 40): 2"
Aluminum Pipe (Schedule 40): 2"
Stainless Steel Pipe (Schedule 40): 1.5"
Mild Steel Round Tube (Wall): 2.5" (.125)
Aluminum Round Tube (Wall): 2.5" (.156)
Stainless Steel Round Tube (Wall): 2.375" (.125)
Chromolly Round Tube (Wall): 2" (.125)
Mild Steel Square Tube (Wall): 2" (.125)
Maximum Speed to 180 Degrees: 9 Seconds
Maximum Center Line Radius (CLR): 9"
Power Requirements: 220V (1-Phase)
The RDB-250 tube bender has the strength to bend up to 2-1/2" tubing and 2" Schedule 40 Pipe, and can be programmed with up to 170 programs with up to 10 bends per program. Up to a 20' indexing table can be attached when multiple bends in variable planes are required that is great for big production runs.
The RDB-250 tube bender can bend at speeds up to 9 seconds for a 180 degree bend and can be programmed to bend up to 360 degrees, great for solid rod applications. Complex serpentine bends can be done with ease. A quick counter die release allows for quick removal of bends and allows for furthering bending pre-bent material.
The counter die positioner has a numerical counter so repositioning of the counter die is a breeze when recalling bend programs. Engaging bends is as simple as pressing the forward foot pedal, and reverse pedal when complete.
1" Round Tube Die Set, 3.0 CLR
1 " Round Tube Die Set, 4.5 CLR
1 " Round Tube Die Set, 5.5 CLR
1 " Square Tube Die Set, 4.5 CLR
1 " Round Tube Die Set, 6.5 CLR
Description of Equipment: No Warranty. Descriptions of equipment are approximate and are intended to serve as a guide. Information provided by Seller concerning design data and conditions including but not limited to design pressures and temperatures, wall thicknesses, sizes, capacities, surface areas, BTU/hr. ratings, HP, GPM, RPM, KW, prior services, code ratings, inspection reports, manufacturers data reports, specification and drawings, etc., is accurate to the best of Seller s belief and knowledge; however. Seller makes no warranty that such information is true and correct and such information is true and such information does not necessarily reflect the current capabilities or condition of equipment being quoted or sold.
