EXCLUSIVE FORUM FOR MACHINE DISMANTLERS AND REPAIR PEOPLE   >   East Chicago   >   Electro-therm digital thermometer TC100A w/probe

Electro-therm digital thermometer TC100A w/probe


Electro-Therm Digital Thermometer TC100A. Item powers up as pictured.
-40 to 300 Degrees F (-40 to 150 degree C)
2) Turn Power on by Depressing the ON Button
3) Unit will begin Monitoring probe, and displaying temperature in Degrees F.
4) Depress the OFF button to turn the meter off.
1) Depressing the C/F button will change the reading from F to C or from C to F.
2) Depressing the LIGHT button will illuminate the display for thirty (30) seconds. Illumination may be terminated by depressing LIGHT button a second time. 3) The right side of the display indicates the operational modes of the instrument.
1) The unit must be charged in the OFF position.
2) A full charge will yield a minimum of two (2) hours of continuous use.
3) Do not operate the TC100A while on recharge. This is not an AC adapter.
1) LO - Under Rang indication. Temperature being monitored is too low for the capabilities of the instrument/probe. Can Also indicate broken or open probe.
2) HI - Over Range Indication. Temperature being monitored is too high for the instrument/Probe.
3) LO. P - Low Power: For TC100A, Charge fully for 16 hours with recharger plugged into unit and into a 115 VAC outlet.



Electro-therm digital thermometer TC100A w/probe